※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part の編集規則に従って起草されました ( www.iso.org/directives を参照)
ISO は、この文書の実装には特許の使用が含まれる可能性があることに注意を促します。 ISO は、請求された特許権に関する証拠、有効性、または適用可能性に関していかなる立場もとりません。この文書の発行日の時点で、ISO はこの文書の実装に必要となる可能性のある特許の通知を受け取っていません。ただし、実装者は、これが www.iso.org/patents で入手可能な特許データベースから取得できる最新の情報を表していない可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 41, プーリーおよびベルト (Veebelts を含む) 、サブ委員会 SC 4, 同期ベルトドライブによって作成されました。
この第 3 版は、マイナー リビジョンを構成する第 2 版 (ISO 17396:2017) を廃止し、置き換えるものです。
変更内容は以下の通りです。
— 第 4 項が追加されました。
1 スコープ
この文書では、機械動力伝達用の同期ベルトドライブや確実な割出しや同期が必要なwhere に使用するプロファイル システム T および AT の同期エンドレスおよびオープン ベルトとプーリの主な特性を指定します。
注同期ベルトドライブは、これまでに、タイミング ベルト ドライブ、ポジティブ ベルト ドライブ、ギア ベルト ドライブなど、さまざまな名称で知られてきました。
ベルトとプーリーの主な特性は次のとおりです。
- a)ベルトの歯の公称寸法。
- b)ベルトの歯のピッチ間隔。
- c)ベルトの長さと幅の寸法。
- d)ベルトの長さ測定仕様。
- e)プーリーの溝の寸法と公差。
- f)プーリーの直径と幅の寸法と公差。
- g)プーリーの品質仕様。
プロファイルシステム T および AT のベルトは、ほとんどの場合、高張力の細いスチールコードのテンションメンバを備えたポリウレタン製です。この文書に特定の力が示されている限り、これらの値はこれらの種類のベルトにのみ有効です。異なる引張コードを備えたポリウレタン ベルト、つまりアラミド ベルトやガラス繊維で強化されたゴム ベルトの場合、値は異なる場合があります。ユーザーとメーカーが適切な値について合意することを目的としています。熱可塑性ポリウレタン製のオープンベルトを接合して、コンベア用途でエンドレスベルトとして機能させることができます。この場合、公差はエンドレス スプライス ベルトのスプライス領域には有効ではありません。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 254, ベルトドライブ - プーリー - 品質、仕上げ、バランス
3 用語と定義
この文書には用語や定義は記載されていません。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had notreceived notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents . ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts), Subcommittee SC 4, Synchronous belt drives.
This third edition cancels and replaces the second edition (ISO 17396:2017), of which it constitutes a minor revision.
The change is as follows:
— Clause 4 has been added.
1 Scope
This document specifies the principal characteristics of synchronous endless and open belts and pulleys of the profile systems T and AT for use in synchronous belt drives for mechanical power transmission and where positive indexing or synchronization can be required.
NOTE Synchronous belt drives have been known by various titles in the past, for example: timing belt drives, positive belt drives, and gear belt drives.
The principal belt and pulley characteristics include:
- a) nominal belt tooth dimensions;
- b) belt tooth pitch spacing;
- c) belt length and width dimensions;
- d) belt length measurement specifications;
- e) pulley groove dimensions and tolerances;
- f) pulley diameter and width dimensions and tolerances;
- g) pulley quality specification.
The belts of the profile systems T and AT are made of polyurethane with high-tension fine steel cord tension members in most cases. As far as certain forces are given in this document, these values are only valid for these kinds of belts. For polyurethane belts with different tensile cords, i.e. aramid or rubber belts reinforced with glass fibre, the values can be different. It is intended that the user and the manufacturer agree about suitable values. Open belts made of thermoplastic polyurethane can be spliced to work as endless belts in conveyor applications. In this case, the tolerances are not valid for the splicing area of the endless spliced belt.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 254, Belt drives — Pulleys — Quality, finish and balance
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminology databases for use in standardization at the following addresses: