※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 17475 は、韓国標準科学研究院と協力して ISO/TC 156 技術委員会「金属および合金の腐食」によって作成されました。
導入
水溶液中での金属や合金の腐食は、一般に電気化学的メカニズムによって引き起こされます。したがって、さまざまな電気化学技術を利用して腐食現象を測定または分析できます。 ASTM G5 [1] および ASTM G150 [2] に基づくこの国際規格は、陽極反応および陰極反応の電気化学反応速度を特徴付けるための定電位動電分極測定の基本ガイドラインを定義しています。
1 スコープ
この国際規格は金属および合金の腐食に適用され、定電位分極および動電位分極測定を行う手順について説明しています。
この試験方法は、陽極反応と陰極反応の電気化学反応速度論、局部腐食の開始、金属の再不動態化挙動を特徴付けるために使用できます。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 8044:1999, 金属および合金の腐食 - 基本用語と定義
- ISO 8407:1991, 金属および合金の腐食 - 腐食試験片からの腐食生成物の除去
- ISO 9400:1990, ニッケル基合金 - 粒界腐食に対する耐性の測定
- ISO 11463:1995, 金属および合金の腐食 - 孔食の評価
- ISO 11846:1995, 金属および合金の腐食 - 溶体化熱処理可能なアルミニウム合金の粒界腐食に対する耐性の決定
参考文献
| 1 | ASTM G5:1994, 定電位および動電位アノード分極測定を行うための標準参照試験法 |
| 2 | ASTM G150:1999, ステンレス鋼の電気化学臨界孔食温度試験の標準試験方法 |
| 3 | 欧州連合腐食出版物 No. 2:1996, 実用的な腐食原理に関する作業部会報告書 |
| 4 | JIS G 0579:1983,ステンレス鋼の陽極分極測定方法 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 17475 was prepared by Technical Committee ISO/TC 156, Corrosion of metals and alloys, in collaboration with the Korea Research Institute of Standards and Science.
Introduction
Corrosion of metals and alloys in aqueous solutions is generally caused by an electrochemical mechanism. Therefore, one can measure or analyse corrosion phenomena, utilizing a variety of electrochemical techniques. This International Standard, based on ASTM G5 [1] and ASTM G150 [2] , defines basic guidelines for potentiostatic potentiodynamic polarization measurements to characterize an electrochemical kinetics of anodic and cathodic reactions.
1 Scope
This International Standard applies to corrosion of metals and alloys, and describes the procedure for conducting potentiostatic and potentiodynamic polarization measurements.
The test method can be used to characterise the electrochemical kinetics of anodic and cathodic reactions, the onset of localised corrosion and the repassivation behaviour of a metal.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 8044:1999, Corrosion of metals and alloys — Basic terms and definitions
- ISO 8407:1991, Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens
- ISO 9400:1990, Nickel-based alloys — Determination of resistance to intergranular corrosion
- ISO 11463:1995, Corrosion of metals and alloys — Evaluation of pitting corrosion
- ISO 11846:1995, Corrosion of metals and alloys — Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
Bibliography
| 1 | ASTM G5:1994, Standard reference test method for making potentiostatic and potentiodynamic anodic polarization measurements |
| 2 | ASTM G150:1999, Standard test method for electrochemical critical pitting temperature testing of stainless steels |
| 3 | European Federation Corrosion Publication No. 2:1996, A working party report on practical corrosion principles |
| 4 | JIS G 0579:1983, Method for making anodic polarization measurement for stainless steels |