※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO 加盟団体) の世界的な連合です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のために加盟機関に回覧されます。
1972 年以前は、技術委員会の作業の結果が ISO 勧告として発行されていました。これらの文書は現在、国際規格に変換されている過程にあります。このプロセスの一環として、技術委員会 ISO/TC 48 は ISO 勧告 R 1769 を見直し、技術的に変換に適していると判断しました。したがって、国際規格 ISO 1769 は、技術的に同一である ISO 勧告 R 1769-1970 に取って代わります。
ISO 勧告 R 1769 は、次の国の加盟機関によって承認されました。
| オーストリア | インド | ポーランド |
| ベルギー | イラン | 南アフリカ共和国 |
| カナダ | アイルランド | スペイン |
| コロンビア | イスラエル | タイ |
| チェコスロバキア | イタリア | 七面鳥 |
| エジプト、アラブ共和国 | 韓国、民主党共和国 | イギリス |
| フランス | オランダ | アメリカ |
| ドイツ | ニュージーランド | ユーゴスラビア |
| ギリシャ | ペルー |
この勧告に反対を表明した加盟団体はなかった。
ISO/R 1769 の国際規格への変換を否定する加盟団体はありませんでした。
1 スコープ
この国際規格は、公称容量を識別するためのワンマーク ピペット、および公称容量と分割単位を識別するための目盛付きピペットの色分けシステムを指定します。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO Member Bodies). The work of developing International Standards is carried out through ISO Technical Committees. Every Member Body interested in a subject for which a Technical Committee has been set up has the right to be represented on that Committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated to the Member Bodies for approval before their acceptance as International Standards by the ISO Council.
Prior to 1972, the results of the work of the Technical Committees were published as ISO Recommendations; these documents are now in the process of being transformed into International Standards. As part of this process, Technical Committee ISO/TC 48 has reviewed ISO Recommendation R 1769 and found it technically suitable for transformation. International Standard ISO 1769 therefore replaces ISO Recommendation R 1769-1970 to which it is technically identical.
ISO Recommendation R 1769 was approved by the Member Bodies of the following countries:
| Austria | India | Poland |
| Belgium | Iran | South Africa, Rep. of |
| Canada | Ireland | Spain |
| Colombia | Israel | Thailand |
| Czechoslovakia | Italy | Turkey |
| Egypt, Arab Rep. of | Korea, Dem.P. Rep. of | United Kingdom |
| France | Netherlands | U.S.A. |
| Germany | New Zealand | Yugoslavia |
| Greece | Peru |
No Member Body expressed disapproval of the Recommendation.
No Member Body disapproved the transformation of ISO/R 1769 into an International Standard.
1 SCOPE
This International Standard specifies a system of colour coding for one-mark pipettes for identification of nominal capacities, and for graduated pipettes for identification of nominal capacities and units of sub-division.