※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、次の情報を参照してください。次の URL: www.iso.org/iso/foreword.html
この文書は、ISO/TC 71 技術委員会、コンクリート、鉄筋コンクリートおよびプレストレストコンクリート、小委員会 SC 1, コンクリートの試験方法によって作成されました。
ISO 17785 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
1 スコープ
この文書は、実験室での舗装用または現場配置からコア抜きされた、新たに混合および硬化した透水性コンクリート試験片の密度および空隙率を試験するための手順を規定します。
この文書には、透水性コンクリートの密度と空隙率を計算するための式も指定されています。
2 規範的参照
この文書には規範的な参照はありません。
3 用語と定義
この文書の目的上、次の用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
密度
所定量のコンクリートの質量とその体積の比 (kg/m 3 )
3.2
無効なコンテンツ
ボイドの割合 (%)
3.3
透水性コンクリート
相互につながった空隙を持ち、水が流れるコンクリート。
注記 1:舗装用の透水性コンクリートは、通常、細骨材をほとんどまたはまったく使用せずに作られており、通常は最大サイズが 10 mm の狭く傾斜した粗骨材が含まれています。公称最大サイズは25mmです。
参考文献
| 1 | ISO 1920-1, コンクリートの試験 - Part 1: 生コンクリートのサンプリング |
| 2 | ISO 1920-2, コンクリートの試験 - Part 2: 生コンクリートの特性 |
| 3 | ISO 1920-5, コンクリートの試験 - Part 5 硬化コンクリートの強度以外の特性 |
| 4 | ISO 17785-1, 透水性コンクリートの試験方法 - Part 1: 浸透速度 |
| 5 | ASTM C1688/C1688M, 混合したばかりの透水性コンクリートの密度および空隙率の標準試験方法 |
| 6 | ASTM C1754/C1754M, 硬化透水性コンクリートの密度および空隙率の標準試験方法 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 71, Concrete, reinforced concrete and pre-stressed concrete, Subcommittee SC 1, Test methods for concrete.
A list of all parts in the ISO 17785 series can be found on the ISO website.
1 Scope
This document specifies a procedure for testing the density and void content of freshly mixed and hardened pervious concrete specimens for pavement in the laboratory or cored from field placements.
This document also specifies formulae for calculating the density and void content of pervious concrete.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
density
ratio of the mass of a given quantity of concrete to its volume, (kg/m3)
3.2
void content
percentage (%) of voids
3.3
pervious concrete
concrete which has interconnected voids that allow for water flow through them.
Note 1 to entry: Pervious concrete for pavement is usually made with little or no fine aggregate and contains narrowly graded coarse aggregate typically with the maximum size of 10 mm. The nominal maximum size is 25 mm.
Bibliography
| 1 | ISO 1920-1, Testing of concrete — Part 1: Sampling of fresh concrete |
| 2 | ISO 1920-2, Testing of concrete — Part 2: Properties of fresh concrete |
| 3 | ISO 1920-5, Testing of concrete — Part 5 Properties of hardened concrete other than strength |
| 4 | ISO 17785-1, Testing methods for pervious concrete — Part 1: Infiltration rate |
| 5 | ASTM C1688/C1688M, Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete |
| 6 | ASTM C1754/C1754M, Standard Test Method for Density and Void Content of Hardened Pervious Concrete |