※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照してください: 序文 — 補足情報 .
この文書を担当する委員会は、ISO/TC 218, 木材です。
1 スコープ
この国際規格は、フローリングとして内部 (インテリア) で使用する無垢材フローリング ボードの要件と特性の試験方法を指定します。また、パッケージングとマーキングの要件も指定します。
仕上げ済みおよび未仕上げの無垢材フローリング ボードの両方に適用できます。無垢材の寄木細工は覆われていません。
2 参考文献
以下の文書の全体または一部は、この文書で規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 2409, 塗料およびワニス — クロスカット試験
- ISO 3130:1975, 木材 — 物理的および機械的試験のための水分含有量の測定
- ISO 15184, 塗料およびワニス — 鉛筆試験による塗膜硬度の測定
- ISO 24294, 木材 — 丸材および製材 — 語彙
- ISO 16415, 非構造木材等級付け要件
3 用語と定義
このドキュメントの目的のために、ISO 24294 および以下に記載されている用語と定義が適用されます。
3.1
無垢フローリング
一次構造または下地床に取り付けられた個々の無垢材ボードの組み立て
3.2
無垢材フローリングボード
平行な側面を持ち、規則的な厚さと一定の輪郭に加工された長い中実 (単層) の木材片で、輪郭を描いた縁や端部の有無にかかわらず、他の類似の木材片と組み立てることができる
図 1 —無垢材フローリング ボードの例
| a) プロファイルされたエッジおよび/またはエンド | b) プロファイルされたエッジおよび/またはエンドなし |
Key
| 1 | 顔 |
| 2 | 終わり |
| 3 | 縁 |
| 4 | 戻る |
3.3
完成した無垢材のフローリング ボード
ラッカー、ワックス、オイルなどで表面をコーティングした床板。
3.4
未完成の無垢材フローリング ボード
表面コーティングのないフローリングボード
3.5
唇をなめる
ミスマッチ
組み立てた床板を平らな面に置いたときの隣接する 2 つの面の高さの差
図 2 —リップの例
Key
| 1 | 唇をなめる |
| 2 | 顔 |
3.6
弓
面に垂直な床板の縦方向の曲率
図 3 —船首の例
Key
| 1 | 弓 |
3.7
カップ
面の幅を横切る床板の曲率
図 4 —カップの例
Key
| 1 | カップ |
3.8
ジャンプ
エッジに垂直なフローリング ボードの縦方向の曲率
図 5 —ばねの例
Key
| 1 | ジャンプ |
3.9
ねじれ
1 つのコーナーが他の 3 つのコーナーの平面から外れている無垢材フローリング ボードの歪み
図 6 —ねじれの例
Key
| 1 | ねじれ |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT), see the following URL: Foreword — Supplementary information .
The committee responsible for this document is ISO/TC 218, Timber.
1 Scope
This International Standard specifies the requirements and test methods of characteristics of solid wood flooring boards for internal (interior) use as flooring. It also specifies packaging and marking requirements.
It is applicable to both finished and unfinished solid wood flooring board. Solid wood parquet is not covered.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 2409, Paints and varnishes — Cross-cut test
- ISO 3130:1975, Wood — Determination of moisture content for physical and mechanical tests
- ISO 15184, Paints and varnishes — Determination of film hardness by pencil test
- ISO 24294, Timber — Round and sawn timber — Vocabulary
- ISO 16415, Non-structural timber grading requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 24294 and the following apply.
3.1
solid wood flooring
assembly of individual solid wood boards installed either on the primary structure or on the sub-floor
3.2
solid wood flooring board
long solid (single-layer) wood piece with parallel sides prepared to a regular thickness and constant profile(s) with or without profiled edges and/or ends, capable of being assembled with other analogous wood pieces
Figure 1—Example of solid wood flooring board
| a) With profiled edges and/or ends | b) Without profiled edges and/or ends |
Key
| 1 | face |
| 2 | end |
| 3 | edge |
| 4 | back |
3.3
finished solid wood flooring board
flooring board that has been surface-coated with lacquer, wax, oil, etc.
3.4
unfinished solid wood flooring board
flooring board without any surface coating
3.5
lipping
mismatch
difference in height between two adjacent faces of assembled flooring boards when laid on a flat surface
Figure 2—Example of lipping
Key
| 1 | lipping |
| 2 | face |
3.6
bow
lengthwise curvature of a flooring board perpendicular to the face
Figure 3—Example of bow
Key
| 1 | bow |
3.7
cup
curvature of a flooring board across the width of the face
Figure 4—Example of cup
Key
| 1 | cup |
3.8
spring
lengthwise curvature of a flooring board perpendicular to the edge
Figure 5—Example of spring
Key
| 1 | spring |
3.9
twist
distortion of a solid wood flooring board in which one corner is out of the plane of the other three corners
Figure 6—Example of twist
Key
| 1 | twist |