※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
適合性評価に関連する ISO 固有の用語や表現の意味の説明、および貿易の技術的障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照してください。 序文 - 補足情報
この文書を担当する委員会は、ISO/TC 61, プラスチック、サブ委員会 SC 9, 熱可塑性材料です。
ISO 18263 は、一般タイトル「プラスチック — 消費者向けのフレキシブルおよびリジッド包装に使用される PP および PE から得られるポリプロピレン (PP) とポリエチレン (PE) の混合物リサイクル」の下にある次の部分で構成されています。
- Part: 指定制度と仕様の根拠
- Part 2: 試験片の作成と特性の測定
1 スコープ
ISO 18263 のこの部分では、成形および押出成形用のフレキシブルおよびリジッド消費者向け包装に使用される、PP および PE から派生したポリプロピレン (PP) とポリエチレン (PE) リサイクル材の混合物の特性を決定する際に使用される試験片の調製方法と標準試験方法が指定されています。危険物の輸送、取り扱い、保管に使用された梱包材をリサイクルしてはなりません。リサイクル品の安定剤レベルの情報を得ることができないため、必要に応じて安定剤を添加する必要があります。試験材料の取り扱い、および成形前の試験材料と試験前の試験片の両方の調整に関する要件は、ISO 18263 のこの部分に記載されています。
2 規範的参照
以下の文書は、全部または一部がこの文書で規範的に参照されており、その適用には不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 178, プラスチック — 曲げ特性の測定
- ISO 179-1, プラスチック — シャルピー衝撃特性の測定 — Part 1: 計器を使用しない衝撃試験
- ISO 179-2, プラスチック — シャルピー衝撃特性の測定 — Part 2: 計装衝撃試験
- ISO 291, プラスチック — 調整および試験用の標準雰囲気
- ISO 472, プラスチック — 語彙
- ISO 527-1, プラスチック — 引張特性の決定 — Part 1: 一般原則
- ISO 527-2, プラスチック — 引張特性の決定 — Part 2: 成形および押出プラスチックの試験条件
- ISO 1133-1, プラスチック — 熱可塑性プラスチックのメルトマスフローレート (MFR) およびメルトボリュームフローレート (MVR) の決定 — Part 1: 標準方法
- ISO 1183-1, プラスチック — 非気泡プラスチックの密度を決定する方法 — Part 1: 浸漬法、液体ピクノメータ法および滴定法
- ISO 1183-2, プラスチック — 非気泡プラスチックの密度を決定する方法 — Part 2: 密度勾配カラム法
- ISO 1183-3, プラスチック — 非気泡プラスチックの密度を決定する方法 — Part 3: ガス比重計法
- ISO 1873-2, プラスチック — ポリプロピレン (PP) 成形および押出材料 — Part 2: 試験片の調製と特性の測定
- ISO 10350-1, プラスチック — 比較可能な単一点データの取得と表示 — Part 1: 成形材料
- ISO 15270, プラスチック — プラスチック廃棄物の回収とリサイクルに関するガイドライン
- ISO 18263-1, プラスチック — 消費者向けの軟質および硬質包装に使用される PP および PE から派生したポリプロピレン (PP) とポリエチレン (PE) の混合物リサイクル — Part 1: 指定システムと仕様の根拠
- ISO 20753, プラスチック — 試験片
3 用語と定義
この文書の目的のために、ISO 472 および ISO 15270 で与えられる用語と定義が適用されます。
参考文献
| 1 | ISO 527-3, プラスチック — 引張特性の測定 — Part 3: フィルムおよびシートの試験条件 |
| 2 | ISO/IEC 17050-1, 適合性評価 — サプライヤーの適合宣言 — Part 1: 一般要件 |
| 3 | ISO/IEC 17050-2, 適合性評価 — サプライヤーの適合宣言 — Part 2: サポート文書 |
| 4 | EN 15343, プラスチック — リサイクルされたプラスチック — プラスチックのリサイクルトレーサビリティと、適合性およびリサイクルされた内容の評価 |
| 5 | NAKAMURA, S.、TOKUMITSU, K.、KITAMURA, M.、MIYAGAWA, E.、KANZAWA T.、TANAKA, A.相溶化剤を含む PE/PP ブレンドの形態と機械的性質。リソースの処理。 2008, 55(2), 56-65 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 61, Plastics, Subcommittee SC 9, Thermoplastic materials.
ISO 18263 consists of the following parts, under the general title Plastics — Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging:
- Part 1: Designation system and basis for specification
- Part 2: Preparation of test specimens and determination of properties
1 Scope
This part of ISO 18263 specifies methods of preparation of test specimens and the standard test methods to be used in determining the properties of mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging for moulding and extrusion. Recyclate from packaging used for the transport, handling, or storage of hazardous goods is not to be used. Since it is impossible to get the information about stabilizer levels of recyclate, it is necessary to add stabilizer as needed. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given in this part of ISO 18263.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 178, Plastics — Determination of flexural properties
- ISO 179-1, Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
- ISO 179-2, Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
- ISO 291, Plastics — Standard atmospheres for conditioning and testing
- ISO 472, Plastics — Vocabulary
- ISO 527-1, Plastics — Determination of tensile properties — Part 1: General principles
- ISO 527-2, Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
- ISO 1133-1, Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
- ISO 1183-1, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
- ISO 1183-2, Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
- ISO 1183-3, Plastics — Methods for determining the density of non-cellular plastics — Part 3: Gas pyknometer method
- ISO 1873-2, Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
- ISO 10350-1, Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
- ISO 15270, Plastics — Guidelines for the recovery and recycling of plastics waste
- ISO 18263-1, Plastics — Mixtures of polypropylene (PP) and Polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging — Part 1: Designation system and basis for specifications
- ISO 20753, Plastics — Test specimens
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 472 and ISO 15270 apply.
Bibliography
| 1 | ISO 527-3, Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets |
| 2 | ISO/IEC 17050-1, Conformity assessment — Supplier's declaration of conformity — Part 1: General requirements |
| 3 | ISO/IEC 17050-2, Conformity assessment — Supplier's declaration of conformity — Part 2: Supporting documentation |
| 4 | EN 15343, Plastics — Recycled Plastics — Plastics recycling traceability and assessment of conformity and recycled content |
| 5 | NAKAMURA, S., TOKUMITSU, K., KITAMURA, M., MIYAGAWA, E., KANZAWA T. and TANAKA, A. Morphology and Mechanical Properties of PE/PP blends with Compatibilizer. Resources processing. 2008, 55(2), 56–65 |