この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 18573 は、技術委員会 ISO/TC 41, プーリーおよびベルト (Veebelts を含む) 、サブ委員会 SC 3, コンベヤベルトによって作成されました。
この第 2 版は、第 1 版 (ISO 18573:2003) を廃止し、置き換えるものであり、そのマイナーリビジョンを構成します。
導入
試験前の試験片のコンディショニングは、必ずしもすべての試験方法ではありませんが、ほとんどの試験方法において必須の実施事項として一般に受け入れられています。その目的は、テストの開始に共通の基準を提供し、特定のテストに最適な精度を求める際に不必要な変数を除去することです。
これらの目的を達成するには、できるだけ多くの変数を標準化することが不可欠です。
スチールコードコンベヤベルト以外のコンベヤベルトには繊維要素が含まれています。これは、高度に疎水性であることも、若干親水性が高いこともあります。同様に、ポリマー層またはカバーは熱可塑性であるか、または熱老化にさらされる可能性があります。これらの各要因は、コンベヤ ベルトの特性に大きな影響を与える可能性があります。コンディショニングが必要かどうか、また必要であれば最も適切な条件は何かを決定する際には、これらの要因を考慮する必要があります。 ISO 139 [1] 、ISO 23529 [2] 、および ISO 2231 [3] に規定されている規定は、この国際規格の作成において考慮されています。
1 スコープ
この国際規格は、プラスチック製かゴム製のカバーが付いているかどうかに関係なく、あらゆる種類のコンベヤ ベルトの調整とテストに使用される温度、湿度、および時間の条件を指定します。また、コンベア ベルトの試験片の製造と試験の間に観察すべき時間間隔の要件も指定します。
特定のテストや材料に適用される特別な条件、または特定の気候環境をシミュレートする特別な条件は含まれません。
2 規範的参照
以下の文書は、全部または一部がこの文書で規範的に参照されており、その適用には不可欠です。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 21183-1, 軽量コンベヤベルト — Part 1: 主な特性と用途
3 用語と定義
この文書の目的上、次の用語と定義が適用されます。
3.1
標準的な雰囲気
サンプルが調整およびテストされる指定された温度と湿度
3.2
標準状態
コンベアベルトの試験片が標準大気と平衡状態にあるときに到達する状態
3.3
水分平衡
コンベヤーベルトの試験片が移動中の空気に自由にさらされた後、質量に目立った変化が見られないときに到達した状態。
3.4
コンディショニング
試験結果の再現性を高めるため、試験直前に試験片を一定時間標準雰囲気にさらすこと。
3.5
熱平衡
コンベア ベルトの試験片がその質量全体にわたって均一な温度にあり、その環境温度から 1 °C 以内にあるときに、その試験片が到達する状態
参考文献
| 1 | ISO 139, テキスタイル — コンディショニングおよびテスト用の標準雰囲気 |
| 2 | ISO 23529, ゴム — 物理試験法用の試験片を準備および調整するための一般手順 |
| 3 | ISO 2231, ゴムまたはプラスチックでコーティングされた生地 — コンディショニングおよびテスト用の標準雰囲気 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 18573 was prepared by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts), Subcommittee SC 3, Conveyor belts.
This second edition cancels and replaces the first edition (ISO 18573:2003), of which it consitutes a minor revision.
Introduction
The conditioning of test pieces prior to testing is commonly accepted as an essential practice in most, but not necessarily all, methods of test. Its purpose is to provide a common ground base for the commencement of the test and to remove an unnecessary variable in the search for the optimum precision for the particular test.
In order to meet these objectives, it is essential to standardize as many of the variables as possible.
Conveyor belts, other than steel cord conveyor belts, contain a textile element. This can be highly hydrophobic or somewhat more hydrophilic. Similarly, the polymer layer or cover can be thermoplastic or subject to thermal ageing. Each of these factors can have a significant effect on the property of the conveyor belt. These factors need to be taken into account when making a decision as to whether conditioning is necessary and, if so, what the most appropriate conditions would be. The provisions given in ISO 139 [1] , ISO 23529 [2] and ISO 2231 [3] have been taken into account in the preparation of this International Standard.
1 Scope
This International Standard specifies the temperature, humidity and time conditions used for the conditioning and testing of all types of conveyor belt, irrespective of whether they have plastics or rubber covers. It also specifies the requirements for the time interval to be observed between production and testing of conveyor belt test pieces.
Special conditions applicable to a particular test or material or simulating a particular climatic environment are not included.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 21183-1, Light conveyor belts — Part 1: Principal characteristics and applications
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
standard atmosphere
specified temperature and humidity in which samples are conditioned and tested
3.2
standard condition
condition reached by a conveyor belt test piece when it is in equilibrium with a standard atmosphere
3.3
moisture equilibrium
condition reached by a conveyor belt test piece when, after free exposure to air in motion, there is no appreciable change in mass
3.4
conditioning
exposure of a test piece to a standard atmosphere for a stipulated period of time immediately before testing, in order to improve the reproducibility of test results
3.5
thermal equilibrium
condition reached by a conveyor belt test piece when it is at a uniform temperature throughout its mass and is within 1 °C of the temperature of its environment
Bibliography
| 1 | ISO 139, Textiles — Standard atmospheres for conditioning and testing |
| 2 | ISO 23529, Rubber — General procedures for preparing and conditioning test pieces for physical test methods |
| 3 | ISO 2231, Rubber- or plastics-coated fabrics — Standard atmospheres for conditioning and testing |