この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令、 Part 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における ISO の WTO 原則への準拠に関する情報については、次の URL を参照して ください 。
この文書を担当する委員会は、ISO/TC 249, 伝統的な中国医学です。
序章
この国際規格は、国際的に取引されている薬草煎じ薬に対する世界的な需要に応えて開発されました。現在市販されている多種多様な薬草煎じ器がありますが、それらの製造を導く基準はありません。漢方薬を投与する手段としての煎じ薬の使用の増加、ならびに安全性と品質に関する患者の期待と懸念の高まりにより、国際基準の実施を通じて薬草煎じ薬の安全性と品質を向上させる必要性が生じています。
一般的に使用されている薬草煎じ器には、主に 2 つのタイプがあります。ハーブ煎じ薬の構造によれば、密閉煎じ薬と非密閉煎じ薬に分けることができます
この国際規格の主な目的は、非密閉型煎じ薬と密閉型煎じ薬の両方の安全性と品質を確保することです。
1 スコープ
この国際規格は、設計圧力が 0.1MPa 未満の薬草煎じ薬の一般的な要件を規定しています。それは、気密および非気密煎じ装置の両方を含む。
これは、個々の薬草調合処方のための薬草煎じ薬装置、および商業用ならびに個人用の薬草煎じ薬装置に適用可能である。それはまた、煎出と包装の統合装置の煎出部分にも適用される。
2 参考文献
以下の文書の全体または一部は、この文書で規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO/IEC Guide 37:2012, 消費者による製品の使用説明書
- ISO 780, 包装 - 流通包装 - 包装の取り扱いと保管のための図記号
- ISO 16528-1:2007, ボイラーおよび圧力容器 — Part 1: 性能要件
- ISO 16528-2:2007, ボイラーおよび圧力容器 — Part 2: ISO 16528-1 の要件を満たすための手順
- ISO 21469:2006, 機械の安全性 — 偶発的な製品接触を伴う潤滑剤 — 衛生要件
- IEC 60204-1:2009, 機械の安全性 — 機械の電気機器 — Part 1: 一般要件
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
3.1
ハーブ装飾器具
薬草片を水と熱で抽出して薬草液を作る装置
3.2
気密装飾装置
大気圧よりも高い煎じ薬圧で煎じ薬を作る間密閉されている容器。
3.3
非気密煎じ器
密閉されておらず、大気圧と等しい煎出圧力で大気に開放されている容器。
参考文献
| [1] | ISO 7010:2011, 図記号 - 安全色と安全標識 - 登録済み安全標識 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 249, Traditional Chinese medicine.
Introduction
This International Standard has been developed in response to worldwide demand for herbal decoction apparatus traded internationally. There is a wide variety of herbal decoction apparatus currently available commercially, but there are no standards guiding their manufacture. Increased use of decoctions as a means of administering herbal medicine, as well as growing patients’ expectations and concerns regarding safety and quality, have given rise to the need to improve the safety and quality of herbal decoction apparatus through implementation of an International Standard.
There are two main types of herbal decoction apparatus in common use. According to the structure of herbal decoction apparatus, it can be divided into hermetic decoction apparatus and non-hermetic decoction apparatus
The primary aim of this International Standard is to ensure the safety and quality of both non-hermetic decoction apparatus and hermetic decoction apparatus.
1 Scope
This International Standard specifies the general requirements of herbal decoction apparatus with design pressures less than 0,1MPa. It includes both hermetic and non-hermetic decoction apparatus.
It is applicable to the herbal decoction apparatus for individual herbal formula prescriptions and for commercial use as well as private use. It also applies to the decocting part of the integrated apparatus of decoction and package.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO/IEC Guide 37:2012, Instructions for use of products by consumers
- ISO 780, Packaging – Distribution packaging — Graphical symbols for handling and storage of packages
- ISO 16528-1:2007, Boilers and pressure vessels — Part 1: Performance requirements
- ISO 16528-2:2007, Boilers and pressure vessels — Part 2: Procedures for fulfilling the requirements of ISO 16528‑1
- ISO 21469:2006, Safety of machinery — Lubricants with incidental product contact — Hygiene requirements
- IEC 60204-1:2009, Safety of machinery — Electrical equipment of machines — Part1: General requirements
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
herbal decoction apparatus
device that produces the herbal liquid by extracting medicinal herb pieces with water and heat
3.2
hermetic decoction apparatus
container that is hermetic during decoction with the decoction pressure higher than the atmospheric pressure
3.3
non-hermetic decoction apparatus
container that is non-hermetic and open to the atmosphere with decoction pressure equal to atmospheric pressure
Bibliography
| [1] | ISO 7010:2011, Graphical symbols — Safety colours and safety signs — Registered safety signs |