※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自発的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。
www.iso.org/iso/foreword.html .
この文書は技術委員会 ISO/TC 38, Textilesによって作成されました。
この ISO 18692-3 の初版は、技術的に改訂された ISO/TS 14909:2012 を取り消して置き換えます。前作からの主な変更点は以下の通り。
- 以前に技術仕様として発行されたドキュメントは、ISO 18692-1:2018 の内容を考慮して、新しい ISO 18692-3 として再編成されました。
ISO 18692 シリーズのすべての部品のリストは、ISO Web サイトで見つけることができます。
1 スコープ
このドキュメントでは、オフショア ステーションキーピングに使用される新しい高弾性ポリエチレン (HMPE) ファイバー ロープの主な特性とテスト方法を指定します。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、テキスト内で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 1968, ファイバーロープおよびコード - 語彙
- ISO 18692-1:2018, オフショア ステーションキーピング用ファイバー ロープ — Part 1: 一般仕様
3 用語と定義
このドキュメントの目的のために、ISO 1968 および ISO 18692-1 に記載されている用語と定義が適用されます。
ISO および IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
参考文献
| [1] | ISO 19901-7:2013, 石油および天然ガス産業 — オフショア構造物に関する特定の要件 — Part 7: 浮体式オフショア構造物および移動式オフショア ユニットのステーションキーピング システム |
| [2] | Vlasblom MP, Bosman RLM, HMPE 係留ロープ アプリケーションのクリープ寿命の予測。 2006年 |
| [3] | François M, Davies P, Grosjean F, Legerstee F繊維ロープの負荷伸び特性のモデル化: ポリエステルおよびその他の繊維. OTC 20846, 2010 |
| [4] | ISO 9554, 繊維ロープ — 一般仕様 |
| [5] | 試験方法 — 引張特性 — DSM Dyneema Ref. DTM YA 001 of 4.02. 2009年 |
| [6] | ISO/IEC 17050-1, 適合性評価 — サプライヤーの適合宣言 — Part 1: 一般要件 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 38, Textiles.
This first edition of ISO 18692-3 cancels and replaces ISO/TS 14909:2012, which has been technically revised. The main changes compared to the previous edition are as follows:
- the document previously published as a Technical Specification has been reorganized as the new ISO 18692-3, taking into account the content of ISO 18692-1:2018.
A list of all parts in the ISO 18692 series can be found on the ISO website.
1 Scope
This document specifies the main characteristics and test methods of new high modulus polyethylene (HMPE) fibre ropes used for offshore stationkeeping.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1968, Fibre ropes and cordage — Vocabulary
- ISO 18692-1:2018, Fibre ropes for offshore stationkeeping — Part 1: General specification
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 1968 and ISO 18692-1 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| [1] | ISO 19901-7:2013, Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units |
| [2] | Vlasblom M.P., Bosman R.L.M., Predicting the Creep Life Time of HMPE Mooring Rope Applications. 2006 |
| [3] | François M., Davies P., Grosjean F., Legerstee F., Modelling Fiber Rope load-elongation properties: Polyester and other fibers. OTC 20846, 2010 |
| [4] | ISO 9554, Fibre ropes — General specifications |
| [5] | Test method — Tensile properties — DSM Dyneema Ref. DTM YA 001 of 4.02.2009 |
| [6] | ISO/IEC 17050-1, Conformity assessment — Supplier’s declaration of conformity — Part 1: General requirements |