※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 18695 は、技術委員会 ISO/TC 38, 繊維、小委員会 SC 2, クレンジング、仕上げおよび耐水性試験によって作成されました。
1 スコープ
この国際規格は、耐水性または撥水仕上げが施されているかどうかに関係なく、すべての織物に適用されます。低衝撃による水の浸透に対する生地の抵抗を測定するため、アパレル生地の雨の浸透抵抗の可能性を予測するために使用できます。このテストは、Bundesmann レイン シャワー テスト (ISO 9865) またはレイン テスト (ISO 22958) が厳しすぎる中程度から緩い構造の生地に最適です。張力がかかった状態で平らにならない生地は対象外です。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 139, テキスタイル — コンディショニングとテストのための標準的な雰囲気
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
3.1
耐水性
水による濡れと浸透に抵抗する特性
参考文献
| [1] | ISO 9865, テキスタイル — Bundesmann レイン シャワー テストによる生地の撥水性の測定 |
| [2] | ISO 22958, テキスタイル - 耐水性 - 雨試験: 水平水噴霧への暴露 |
| [3] | AATCC 試験方法 42 耐水性: 衝撃浸透試験 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 18695 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 2, Cleansing, finishing and water resistance tests.
1 Scope
This International Standard is applicable to any textile fabric, which may or may not have been given a water-resistant or water-repellent finish. It measures the resistance of fabrics to the penetration of water by low impact, and thus can be used to predict the probable rain penetration resistance of apparel fabrics. The test is best suited for fabrics of medium to loose construction where the Bundesmann rain-shower test (ISO 9865), or Rain Test (ISO 22958) is too severe. Fabrics that do not lie flat under tension are not applicable.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 139, Textiles — Standard atmospheres for conditioning and testing
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
water resistance
characteristic of resisting wetting and penetration by water
Bibliography
| [1] | ISO 9865, Textiles — Determination of water repellency of fabrics by the Bundesmann rain-shower test |
| [2] | ISO 22958, Textiles — Water resistance — Rain tests: exposure to a horizontal water spray |
| [3] | AATCC Test Method 42 Water Resistance: Impact Penetration Test |