※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 18928 は、ISO/TC 42, 写真技術委員会によって作成されました。
この第 3 版は、第 2 版 (ISO 18928:2002) を廃止し、置き換えるものであり、次の変更を加えたマイナー改訂版となります。
- 付属書 A は削除されました。
導入
国際規格は、処理済み安全写真フィルム (ISO 18911)、処理済み写真反射プリント (ISO 18920)、処理済み写真乾板 (ISO 18918)、および安全フィルムの仕様 (ISO 18906) の保管に関する推奨慣行を明記して作成されています。
この国際規格は、未処理の写真素材の保管に関するものです。未処理ストレージと処理済みストレージに関する推奨事項の多くは非常に似ていますが、いくつかの重要な違いがあります。これらには、低温による非常に有益な影響と、有害な保管や放射線による有害な影響が含まれます。
1 スコープ
この国際規格は、未処理の写真材料の推奨保管条件を規定しています。加工されたフィルムやプリントには適用されません。
この国際規格は、白黒およびカラー写真材料 (ネガフィルム、ポジフィルム、リバーサルフィルム、ポジ紙、X 線フィルム) および安全フィルムに適用されます。
2 用語と定義
この文書の目的上、次の用語と定義が適用されます。
2.1
写真生素材
化学線にさらされておらず、処理もされていない写真素材
参考文献
| 1 | ISO 18906, 画像材料 — 写真フィルム — 安全フィルムの仕様 |
| 2 | ISO 18911, 画像材料 — 処理済み安全写真フィルム — 保管慣行 |
| 3 | ISO 18918, 画像材料 - 処理された写真乾板 - 保管方法 |
| 4 | ISO 18920, イメージング材料 — 反射プリント — 保管方法 |
| 5 | Suleiman OH, Conway BH, Fewell TR, Slayton RJ, Rueter FG, Gray J.、医療用 X 線フィルムの放射線防護要件。医学。物理学。 1995, 22 (10) pp. 1691–1693 |
| 6 | Walsh JM, McCarthy DJ, McIninch VG Airport の X 線とカメラ フィルム、写真および画像製造業者協会向けに作成された技術レポート、Inc.、550 Mamaroneck Ave, Harrison, NY 10528, 1993 年 10 月 |
| 7 | PIMA 技術レポート「CTX-5000SP とカメラ フィルム」 、1997 年 6 月 |
| 8 | 現在の情報の概要、映画フィルムの X 線かぶりの回避、Eastman Kodak Company 発行、1997 年 12 月 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 18928 was prepared by Technical Committee ISO/TC 42, Photography.
This third edition cancels and replaces the second edition (ISO 18928:2002), of which it constitutes a minor revision with the following changes:
- Annex A has been removed.
Introduction
International Standards have been written specifying the recommended practices for the storage of processed safety photographic film (ISO 18911), processed photographic reflection prints (ISO 18920), processed photographic plates (ISO 18918), and the specifications for safety film (ISO 18906).
This International Standard is concerned with the storage of unprocessed photographic materials. While many of the recommendations for unprocessed and processed storage are very similar, there are some important differences. These include the very beneficial effects of low temperature and the harmful effects of adverse storage and radiation.
1 Scope
This International Standard specifies recommended storage conditions for unprocessed photographic materials. It is not applicable to processed films and prints.
This International Standard is applicable to black-and-white and colour photographic materials (negative films, positive films, reversal films, positive papers, and X-ray films), as well as to safety films.
2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
2.1
raw photographic material
photographic material that has not been exposed to actinic radiation and has not been processed
Bibliography
| 1 | ISO 18906, Imaging materials — Photographic films — Specifications for safety film |
| 2 | ISO 18911, Imaging materials — Processed safety photographic films — Storage practices |
| 3 | ISO 18918, Imaging materials — Processed photographic plates — Storage practices |
| 4 | ISO 18920, Imaging materials — Reflection prints — Storage practices |
| 5 | Suleiman O.H., Conway B.H., Fewell T.R., Slayton R.J., Rueter F.G., Gray J., Radiation protection requirements for medical x-ray film. Med. Phys. 1995, 22 (10) pp. 1691–1693 |
| 6 | Walsh J.M., McCarthy D.J., McIninch V.G. Airport x-rays and camera films, Technical report prepared for the Photographic & Imaging Manufacturers Association, Inc., 550 Mamaroneck Ave, Harrison, NY 10528, October 1993 |
| 7 | PIMA technical report entitled The CTX-5000SP and camera films, June 1997 |
| 8 | Current information summary, Avoiding X-ray fogging of motion-picture film, Eastman Kodak Company publication, December, 1997 |