この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語と表現の意味に関する説明、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、次の URL を参照してください: http:/// www.iso.org/iso/foreword.html .
このドキュメントは、技術委員会 ISO/TC 213, 寸法および形状の製品仕様と検証によって作成されました。
ISO 1938 シリーズのすべての部品のリストは、ISO Web サイトで見つけることができます。
この文書には、ISO/R 1938:1971 の 3.9.4 で扱われたプラグ ゲージの設定とリング ゲージの設定に関する要件は含まれていません。
このドキュメントは、ISO 14978 で開発された概念と原則をカバーしています。
序章
このドキュメントは、Geometrical Product Specification (GPS) 規格であり、一般的な GPS 規格と見なされます (ISO 14638 を参照)これは、一般的な GPS マトリックスの規格のサイズ チェーンのリンク F と G に影響を与えます。この文書と他の規格および GPS マトリックス モデルとの関係の詳細については、付録 B を参照してください。
ISO 14638 で指定されている ISO/GPS マトリックス モデルは、このドキュメントが含まれる ISO/GPS システムの概要を示しています。 ISO 8015 で指定された ISO/GPS の基本規則がこの文書に適用され、ISO 14253-1 で指定されたデフォルトの決定規則がこの文書に従って作成された仕様に適用されます。
このドキュメントで使用されている用語と概念 (ISO/R 1938:1971 と比較して) は、他の GPS 規格のニーズと用語に従って変更されています。
このドキュメントでは、基準ディスク ゲージを扱います。基準ディスク ゲージの使用については、付録 A で説明されています。
注表 2 の内容は、ISO 14405-1 および ISO 1101 で指定された修飾子を使用しています。
1 スコープ
このドキュメントは、基準ディスク ゲージの最も重要な計測および設計特性を指定します。
このドキュメントは、500 mm までのゲージのリニア サイズをカバーしています。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 286-1, 幾何学的製品仕様 (GPS) — 直線サイズの公差に関する ISO コード システム — 1: 公差、偏差、はめあいの基礎
- ISO 1101, 幾何学的製品仕様 (GPS) — 幾何公差 — 形状、方向、位置、振れの公差
- ISO 1938-1:2015, 製品の幾何学的仕様 (GPS) — 寸法測定装置 — 1: 直線サイズのプレーン限界ゲージ
- ISO 14405-1, 幾何学的製品仕様 (GPS) — 寸法公差 — 1: 線形サイズ
- ISO 17450-2, 幾何学的製品仕様 (GPS) — 一般的な概念 — 2: 基本的な信条、仕様、オペレーター、不確実性とあいまいさ
- ISO/IEC Guide 98-3, 測定の不確かさ — 3: 測定における不確かさの表現の手引き (GUM:1995)
- ISO/IEC Guide 99, 計量に関する国際語彙 — 基本的および一般的な概念と関連用語 (VIM)
3 用語と定義
このドキュメントの目的のために、ISO 286-1, ISO 1938-1, ISO 14405-1, ISO 17450-2, ISO/IEC Guide 98-3, および ISO/IEC Guide 99 に記載されている用語と定義、および以下が適用されます。 .
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
3.1
基準ディスクゲージ
ギャップゲージの作業サイズを決定するために設計され意図されたゲージ。
3.2
荷下ろしサイズ
私たち
<ギャップゲージの>測定力がゼロのときのギャップゲージの測定面間の垂直距離
3.3
作業サイズ
WS
<ギャップ ゲージの> ギャップ ゲージがちょうどその上を垂直方向に通過するディスクの直径。
参考文献
| [1] | ISO 1, 幾何学的製品仕様 (GPS) — 幾何学的および寸法特性の仕様のための標準参照温度 |
| [2] | ISO 1302, Geometrical Product Specifications (GPS) — 技術製品ドキュメントにおける表面テクスチャの表示 |
| [3] | ISO 3650, 幾何学的製品仕様 (GPS) — 長さ規格 — ゲージ ブロック |
| [4] | ISO 8015, 幾何学的製品仕様 (GPS) — 基礎 — 概念、原則、および規則 |
| [5] | ISO 14253-1:2013, 製品の幾何学的仕様 (GPS) — ワークおよび測定機器の測定による検査 — 1: 仕様への適合または不適合を証明するための判定規則 |
| [6] | ISO 14638, 幾何学的製品仕様 (GPS) — マトリックス モデル |
| [7] | ISO 14978:2006, 幾何学的製品仕様 (GPS) — GPS 測定機器の一般的な概念と要件 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: http:/// www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 213, Dimensional and geometrical product specifications and verification.
A list of all parts in the ISO 1938 series can be found on the ISO website.
This document does not include requirements for setting plug gauges and setting ring gauges, which were dealt with in ISO/R 1938:1971, 3.9.4.
This document covers the concepts and principles developed in ISO 14978.
Introduction
This document is a Geometrical Product Specification (GPS) standard and is to be regarded as a general GPS standard (see ISO 14638). It influences links F and G of the size chain of standards in the general GPS matrix. For more detailed information on the relation of this document to other standards and the GPS matrix model, see Annex B.
The ISO/GPS Matrix model given in ISO 14638 gives an overview of the ISO/GPS system of which this document is a part. The fundamental rules of ISO/GPS given in ISO 8015 apply to this document and the default decision rules given in ISO 14253-1 apply to specifications made in accordance with this document, unless otherwise indicated.
The terms and concepts used in this document (compared to ISO/R 1938:1971) have been changed according to needs and terminology in the other GPS standards.
This document deals with reference disk gauges. The use of reference disk gauges is explained in Annex A.
NOTE The content of Table 2 uses the modifiers given in ISO 14405-1 and ISO 1101.
1 Scope
This document specifies the most important metrological and design characteristics of reference disk gauges.
This document covers linear sizes of the gauge up to 500 mm.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 286-1, Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — 1: Basis of tolerances, deviations and fits
- ISO 1101, Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
- ISO 1938-1:2015, Geometrical product specifications (GPS) — Dimensional measuring equipment — 1: Plain limit gauges of linear size
- ISO 14405-1, Geometrical product specifications (GPS) — Dimensional tolerancing — 1: Linear sizes
- ISO 17450-2, Geometrical product specifications (GPS) — General concepts — 2: Basic tenets, specifications, operators, uncertainties and ambiguities
- ISO/IEC Guide 98-3, Uncertainty of measurement — 3: Guide to the expression of uncertainty in measurement (GUM:1995)
- ISO/IEC Guide 99, International vocabulary of metrology — Basic and general concepts and associated terms (VIM)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 286-1, ISO 1938-1, ISO 14405-1, ISO 17450-2, ISO/IEC Guide 98-3 and ISO/IEC Guide 99 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
reference disk gauge
gauge designed and intended to determine the working size of a gap gauge
3.2
unloaded size
US
<of a gap gauge> perpendicular distance between the gauging faces of a gap gauge when the measuring force is zero
3.3
working size
WS
<of a gap gauge> diameter of a disk over which the gap gauge just passes in a vertical direction under the working load marked on it, or, if this is not indicated, under its own weight
Bibliography
| [1] | ISO 1, Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties |
| [2] | ISO 1302, Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation |
| [3] | ISO 3650, Geometrical Product Specifications (GPS) — Length standards — Gauge blocks |
| [4] | ISO 8015, Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules |
| [5] | ISO 14253-1:2013, Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — 1: Decision rules for proving conformity or nonconformity with specifications |
| [6] | ISO 14638, Geometrical product specifications (GPS) — Matrix model |
| [7] | ISO 14978:2006, Geometrical product specifications (GPS) — General concepts and requirements for GPS measuring equipment |