※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語や表現の意味、貿易技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www.iso.org/iso/foreword.html を参照してください。
この文書は ISO/TC 216フットウェア技術委員会によって作成されました。
警告この文書の使用には、危険な物質、作業、および機器が含まれる可能性があります。その使用に関連するすべての安全性または環境問題に対処することを目的とするものではありません。この文書を適用する前に、人員と環境の安全と健康を確保するために適切な措置を講じるのは、この文書の使用者の責任です。
1 スコープ
この文書は、溶媒抽出と質量選択検出器付きガスクロマトグラフィー (GC-MS) を使用して、履物および履物コンポーネント中の 12 種類のニトロソアミン (付録 A を参照) の含有量を測定する方法を規定しています。
この文書は履物素材のゴムに適用されます。
注ISO/TR 16178 は、この決定にどの材料が関係するかを定義しています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 4787, 実験用ガラス器具 - 容積計器 - 容量のテスト方法と使用方法
3 用語と定義
この文書には用語や定義は記載されていません。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
参考文献
| 1 | ISO/TR 16178, 履物 — 履物および履物コンポーネントに潜在的に存在する可能性のある重要な物質 |
| 2 | EN 12868:2017, 児童使用およびケアに関する記事 — エラストマーまたはゴム製の乳首およびおしゃぶりからの N-ニトロソアミンおよび N-ニトロソ化可能物質の放出を測定する方法 |
| 3 | EN 71-12:2016, おもちゃの安全性 - N-ニトロソアミンおよびN-ニトロソ化可能物質 |
| 4 | ISO 13528:2015, 研究所間比較による技能試験で使用する統計的手法 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 216, Footwear.
WARNING The use of this document can involve hazardous materials, operations and equipment. It does not purport to address all of the safety or environmental problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel and the environment prior to application of the document.
1 Scope
This document specifies a method for the determination of the content of 12 kinds of Nitrosamines (see Annex A) in footwear and footwear components by using solvent extraction and Gas chromatography with mass selective detector (GC-MS).
This document is applicable to rubber in footwear materials.
NOTE ISO/TR 16178 defines which materials are concerned by this determination.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 4787, Laboratory glassware — Volumetric instruments — Methods for testing of capacity and for use
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| 1 | ISO/TR 16178, Footwear — Critical substances potentially present in footwear and footwear components |
| 2 | EN 12868:2017, Child use and care articles — Methods for determining the release of N‑nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers |
| 3 | EN 71-12:2016, Safety of toys — N-nitrosamines and N-nitrosatable substances |
| 4 | ISO 13528:2015, Statistical methods for use in proficiency testing by interlaboratory comparison |