※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 2010 は、技術委員会 ISO/TC 2, Fasteners 、小委員会 SC 11, Fasteners with metric external threadによって作成されました。
この第 4 版は、マイナー リビジョンを構成する第 3 版 (ISO 2010:1994) を取り消して置き換えます。
1 スコープ
この国際規格は、製品等級 A の M1.6 から M10 までのねじ山を備えたすりわり付き皿頭ねじの特性を規定しています。
特別な場合に、この国際規格に記載されている以外の仕様が必要な場合は、ISO 261, ISO 888, ISO 898-1, ISO 965-2, および ISO 3506-1 などの既存の国際規格から選択できます。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 225, ファスナー — ボルト、ネジ、スタッド、ナット — 記号と寸法の説明
- ISO 261, ISO 汎用メートルねじ — 一般計画
- ISO 898-1, 炭素鋼および合金鋼で作られたファスナーの機械的特性 — Part 1: 指定された特性クラスを持つボルト、ネジ、およびスタッド — 並目ねじおよび細目ねじ
- ISO 965-2, ISO 汎用メートルねじ — 公差 — Part 2: 汎用おねじおよびめねじのサイズの制限 — 中品質
- ISO 3269, ファスナー — 受け入れ検査
- ISO 3506-1, 耐腐食性ステンレス鋼ファスナーの機械的特性 — Part 1: ボルト、ねじ、およびスタッド
- ISO 4042, ファスナー — 電気メッキコーティング
- ISO 4759-1, ファスナーの公差 — Part 1: ボルト、ネジ、スタッド、およびナット — 製品グレード A, B, および C
- ISO 6157-1, Fasteners — Surface discontinuities — Part 1: 一般要件のボルト、ネジ、およびスタッド
- ISO 8839, ファスナーの機械的特性 — 非鉄金属製のボルト、ネジ、スタッド、ナット
- ISO 8992, Fasteners — ボルト、ねじ、スタッド、およびナットの一般要件
- ISO 10683, ファスナー — 無電解亜鉛フレークコーティング
- ISO 16048, 耐腐食性ステンレス鋼ファスナーのパッシベーション
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 2010 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 11, Fasteners with metric external thread.
This fourth edition cancels and replaces the third edition (ISO 2010:1994), of which it constitutes a minor revision.
1 Scope
This International Standard specifies the characteristics of countersunk slotted raised head screws of product grade A and with threads from M1,6 to M10 inclusive.
If, in special cases, specifications other than those listed in this International Standard are required, they can be selected from existing International Standards, for example ISO 261, ISO 888, ISO 898-1, ISO 965-2 and ISO 3506-1.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 225, Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions
- ISO 261, ISO general purpose metric screw threads — General plan
- ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
- ISO 965-2, ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality
- ISO 3269, Fasteners — Acceptance inspection
- ISO 3506-1, Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs
- ISO 4042, Fasteners — Electroplated coatings
- ISO 4759-1, Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
- ISO 6157-1, Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements
- ISO 8839, Mechanical properties of fasteners — Bolts, screws, studs and nuts made of non-ferrous metals
- ISO 8992, Fasteners — General requirements for bolts, screws, studs and nuts
- ISO 10683, Fasteners — Non-electrolytically applied zinc flake coatings
- ISO 16048, Passivation of corrosion-resistant stainless-steel fasteners
Bibliography
| [1] | ISO 888, Bolts, screws and studs — Nominal lengths, and thread lengths for general purpose bolts |
| [2] | ISO 7721, Countersunk head screws — Head configuration and gauging |