※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 20279 は、技術委員会 ISO/TC 190, 土壌品質、小委員会 SC 3, 化学的方法および土壌特性によって作成されました。
警告 — タリウム溶液は非常に有毒です。摂取を避けるために適切な措置を講じなければならない。これらの溶液の廃棄には注意が必要です。
この国際規格で使用される特定の手順、試薬、および装置は、特に濃酸、タリウムの有毒溶液、および高圧ガスに関連して、潜在的な危険をもたらします。ユーザーは、そのような状況で必要な安全手順、および法的要件 (廃棄物処理を含む) に精通していることを確認する必要があります。疑問がある場合は、管轄当局に助言を求めてください。
1 スコープ
この国際規格は、硝酸と過酸化水素による土壌からのタリウムの抽出方法と、電熱原子吸光分析 (ETAAS) による抽出物中のタリウムの測定方法を規定しています。
注記この方法の関連作業範囲は、およそ 0.05 mg/kg から 100 mg/kg です。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 3696:1987, 分析ラボ用水 — 仕様および試験方法
- ISO 11464:1994, 土壌品質 - 物理化学分析のためのサンプルの前処理
- ISO 11465:1993, 土壌品質 — 質量ベースの乾物および水分含有量の測定 — 重量法
- ASTM E11:2004, 試験目的の金網およびふるいの標準仕様
参考文献
| [1] | ISO 648:1977, 実験用ガラス器具 - ワンマーク ピペット |
| [2] | ISO 1042:1998, 実験用ガラス器具 — ワンマークのメスフラスコ |
| [3] | ISO 5725-2:1994, 測定方法と結果の精度 (真実性と精度) — Part 2: 標準測定方法の再現性と再現性を決定するための基本的な方法 |
| [4] | ISO 11466:1995, 土壌品質 — 王水に可溶な微量元素の抽出 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 20279 was prepared by Technical Committee ISO/TC 190, Soil quality, Subcommittee SC 3, Chemical methods and soil characteristics.
WARNING — Thallium solutions are highly toxic. Appropriate measures shall be taken to avoid ingestion. Care should be taken in the disposal of these solutions.
Certain procedures, reagents and apparatus used in this International Standard pose potential hazards, especially in connection with concentrated acids, toxic solutions of thallium, and high-pressure gases. Users should ensure that they are familiar with the safety procedures necessary in such situations, and with any legal requirements (including waste disposal). If in any doubt, seek advice from the competent authorities.
1 Scope
This International Standard specifies methods for extraction of thallium from soil by nitric acid and hydrogen peroxide and its determination in the extract by electrothermal atomic absorption spectrometry (ETAAS).
NOTE The relevant working range of this method is approximately from 0,05 mg/kg to 100 mg/kg.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 3696:1987, Water for analytical laboratory use — Specification and test methods
- ISO 11464:1994, Soil quality — Pretreatment of samples for physico-chemical analyses
- ISO 11465:1993, Soil quality — Determination of dry matter and water content on a mass basis — Gravimetric method
- ASTM E11:2004, Standard Specification for Wire Cloth and Sieves for Testing Purposes
Bibliography
| [1] | ISO 648:1977, Laboratory glassware — One-mark pipettes |
| [2] | ISO 1042:1998, Laboratory glassware — One-mark volumetric flasks |
| [3] | ISO 5725-2:1994, Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| [4] | ISO 11466:1995, Soil quality — Extraction of trace elements soluble in aqua regia |