※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語と表現の意味に関する説明、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、次の URL を参照してください: www.iso .org/iso/foreword.html .
この文書は、専門委員会 ISO/TC 206, ファイン セラミックスによって作成されました。
1 スコープ
このドキュメントでは、インパルス励起法を使用して、高温での厚いセラミック単層コーティング (厚さ > 0.03 mm) の弾性率を測定するための試験方法を指定しています。試験片の準備、試験モードと速度 (負荷速度または変位)、データ収集、および報告手順の手順が示されています。
このドキュメントは、主にセラミックまたは金属基板上の脆性セラミック コーティングに適用されます。この試験方法は、材料研究、品質管理、特性評価、および設計データ生成の目的で使用できます。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
3.1
弾性率
平面応力と平面ひずみの比
注記 1:ヤング率とも呼ばれます。
3.2
曲げ振動
細長い棒または棒の変位が長さ寸法に垂直な平面内にあるときに発生する振動
3.3
厚み比
基材の厚さに対するコーティングの厚さの比率
参考文献
| [1] | ISO 18558, ファイン セラミックス (アドバンスド セラミックス、アドバンスト テクニカル セラミックス) — セラミック チューブおよびリングの弾性率および曲げ強度を測定するための試験方法 |
| [2] | Bao YW, Zhou YC, Bu XX et al.、相対法によるハード コーティングの弾性率と強度の評価。材料理科密接に。 A. 2007, 458 (1-2) pp. 268–274 |
| [3] | Bao YW, Wang W, Zhou YC, 深さ感知圧痕測定に基づく弾性率と硬度の関係の調査。 Acta Mater. 2004, 52, pp. 5397-5404 |
| [4] | Bao YW, Zhou YC, Ti 3 SiC 2および Ti 3 AlC 2セラミックの高温弾性率と弾性回復の評価。材料レット。 2003, 57, pp. 4018-4022 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 206, Fine ceramics.
1 Scope
This document specifies a method of test for determining the elastic modulus of thick ceramic monolayer coatings (thickness > 0,03 mm) at elevated temperatures, using the impulse excitation method. Procedures for test piece preparation, test modes and rates (load rate or displacement), data collection, and reporting procedures are given.
This document applies primarily to brittle ceramic coatings on ceramic or metal substrates. This test method can be used for material research, quality control, and characterization and design data-generation purposes.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 3611, Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics
- ISO 17561, Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
- IEC 60584-1, Thermocouples — Part 1: EMF specifications and tolerances
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
elastic modulus
ratio of plane stress to plane strain
Note 1 to entry: Also known as Young’s modulus.
3.2
flexural vibrations
vibrations that occur when the displacements in a slender rod or bar are in a plane normal to the length dimension
3.3
thickness ratio
ratio of the coating thickness to the substrate thickness
Bibliography
| [1] | ISO 18558, Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus and bending strength of ceramic tube and rings |
| [2] | Bao Y.W., Zhou Y.C., Bu X.X. et al., Evaluating elastic modulus and strength of hard coatings by relative method. Mater. Sci. Eng. A. 2007, 458 (1-2) pp. 268–274 |
| [3] | Bao Y.W., Wang W., Zhou Y.C., Investigation of the relationship between elastic modulus and hardness based on depth-sensing indentation measurements. Acta Mater. 2004, 52, pp. 5397–5404 |
| [4] | Bao Y.W., Zhou Y.C., Evaluating high-temperature modulus and elastic recovery of Ti3SiC2 and Ti3AlC2 ceramics. Mater. Lett. 2003, 57, pp. 4018–4022 |