※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 20381 は、技術委員会 ISO/TC 214, 昇降作業プラットフォームによって作成されました。
重要 — このドキュメントの電子ファイルには、ドキュメントを正しく理解するのに役立つと考えられる色が含まれています。そのため、ユーザーはカラー プリンターを使用してこのドキュメントを印刷することを検討する必要があります。
1 スコープ
この国際規格は、移動式昇降作業台 (MEWP) のオペレータ コントロールおよびその他の表示用の一般的なグラフィック シンボルを確立します。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- IEC 80416-3:2002, 機器で使用する図記号の基本原則 — Part 3: 図記号の適用に関するガイドライン
3 用語と定義
この国際規格の目的のために、次の用語と定義が適用されます。
3.1
シンボル
言語とは無関係に情報を伝達するために使用される視覚的に認識可能な図形
注記1描画、印刷、その他の方法で作成することができます。
参考文献
| [1] | ISO 3461-1:1988, グラフィック シンボル作成の一般原則 — Part 1: 機器で使用するグラフィック シンボル |
| [2] | ISO 6405-1, 土工機械 — オペレーター制御およびその他のディスプレイの記号 — Part 1: 共通記号 |
| [3] | ISO 7000, 機器で使用する図記号 — 索引と概要 |
| [4] | ISO 7010, 図記号 — 安全色および安全標識 — 職場および公共エリアで使用される安全標識 |
| [5] | IEC 60417-DB-12M, 機器で使用する図記号1) |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 20381 was prepared by Technical Committee ISO/TC 214, Elevating work platforms.
IMPORTANT — The electronic file of this document contains colours which are considered to be useful for the correct understanding of the document. Users should therefore consider printing this document using a colour printer.
1 Scope
This International Standard establishes general graphic symbols for the operator controls and other displays of mobile elevating work platforms (MEWPs).
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- IEC 80416-3:2002, Basic principles for graphical symbols for use on equipment — Part 3: Guidelines for the application of graphical symbols
3 Terms and definitions
For the purposes of this International Standard, the following terms and definitions apply.
3.1
symbol
visually perceptible figure used to transmit information independently of language
Note 1 to entry: It can be produced by drawing, printing or other means.
Bibliography
| [1] | ISO 3461-1:1988, General principles for the creation of graphical symbols — Part 1: Graphical symbols for use on equipment |
| [2] | ISO 6405-1, Earth-moving machinery — Symbols for operator controls and other displays — Part 1: Common symbols |
| [3] | ISO 7000, Graphical symbols for use on equipment — Index and synopsis |
| [4] | ISO 7010, Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas |
| [5] | IEC 60417-DB-12M, Graphical symbols for use on equipment1) |