この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO 加盟団体) の世界的な連合です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のために加盟機関に回覧されます。
国際規格 ISO 2042 は、技術委員会 ISO/TC 20, 航空機および宇宙船によって起草され、1970 年 6 月に加盟団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | ギリシャ | 南アフリカ共和国 |
| ベルギー | インド | スペイン |
| カナダ | イスラエル | スイス |
| チェコスロバキア | 日本 | 七面鳥 |
| エジプト・アラブ共和国 | オランダ | イギリス |
| フランス | ニュージーランド | アメリカ |
この文書の不承認を表明した加盟団体はなかった。
1 適用範囲と適用分野
この国際規格は、明確な定義と読みやすさの必要性と一致する最も簡単な描画を可能にするために、航空機の電気回路図の作成における統一性を規定しています。これらの図面は、製造図面としての使用または配線図マニュアルでの複製に適した形式であることが意図されています。
この国際規格に定められた原則の適用を説明する図を附属書に示します。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO Member Bodies). The work of developing International Standards is carried out through ISO Technical Committees. Every Member Body interested in a subject for which a Technical Committee has been set up has the right to be represented on that Committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated to the Member Bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 2042 was drawn up by Technical Committee ISO/TC 20, Aircraft and space vehicles, and circulated to the Member Bodies in June 1970.
It has been approved by the Member Bodies of the following countries:
| Australia | Greece | South Africa, Rep. of |
| Belgium | India | Spain |
| Canada | Israel | Switzerland |
| Czechoslovakia | Japan | Turkey |
| Egypt, Arab Rep of | Netherlands | United Kingdom |
| France | New Zealand | U.S.A. |
No Member Body expressed disapproval of the document.'
1 SCOPE AND FIELD OF APPLICATION
This International Standard provides for uniformity in the preparation of aircraft electrical diagrams to permit the greatest ease of drawing consistent with the need for clear definition and legibility. It is intended that these drawings should be of a format suitable for use as production drawings or for reproduction in wiring diagram manuals.
A diagram illustrating the application of the principles laid down in this International Standard is shown in the Annex.