※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO 加盟団体) の世界的な連合です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のために加盟機関に回覧されます。
国際規格 ISO 2047 は、技術委員会 ISO/TC 97, コンピュータおよび情報処理によって起草され、1972 年 12 月に加盟団体に回覧されました。
以下の国の加盟団体によって承認されています。
| ベルギー | アイルランド | 南アフリカ共和国 |
| ブラジル | イタリア | スウェーデン |
| カナダ | 日本 | スイス |
| チェコスロバキア | メキシコ | イギリス |
| デンマーク | ニュージーランド | アメリカ |
| エジプト、アラブ共和国 | ポーランド | |
| フランス | ルーマニア |
次の国の加盟団体は、この文書の不承認を表明しました。
ドイツ
オランダ
1 スコープ
この国際規格は、情報交換用の ISO 7 ビット コード化文字セット (ISO 646) の列 0 および 1 の制御文字のグラフィカル表現を指定します。また、通常は印刷されない文字 SPACE (コード テーブルの位置 2/0) と文字 DELETE (コード テーブルの位置 7/15) のグラフィック表示も提供します。
この国際規格では、次の 2 つの表現方法が指定されています。
- これらの通常は印刷されない文字のそれぞれのグラフィカルな表現に単一の文字が必要な特定の記号のセット。
- ISO 7 ビット テーブルで使用される略語から派生した 2 つの文字で構成される英数字表現のセット。
3 参照
- ISO 646, 情報処理交換用の 7 ビット コード化文字セット。
FOREWORD
ISO (the Internationai Organization for Standardization) is a worldwide federation of national standards institutes (ISO Member Bodies). The work of developing International Standards is carried out through ISO Technical Committees. Every Member Body interested in a subject for which a Technical Committee has been set up has the right to be represented on that Committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated to the Member Bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 2047 was drawn up by Technical Committee ISO/TC 97, Computers and information processing, and circulated to the Member Bodies in December 1972.
It has been approved by the Member Bodies of the following countries:
| Belgium | Ireland | South Africa, Rep. of |
| Brazil | Italy | Sweden |
| Canada | Japan | Switzerland |
| Czechoslovakia | Mexico | United Kingdom |
| Denmark | New Zealand | U.S.A. |
| Egypt, Arab Rep. of | Poland | |
| France | Romania |
The Member Bodies of the following countries expressed disapproval of the document:
Germany
Netherlands
1 SCOPE
This International Standard specifies graphical representations of the control characters of columns 0 and 1 of the ISO 7- bit coded character set for information interchange (ISO 646). It also provides graphical representations for the normally non-printing character SPACE (position 2/0 of the Code Table) and for the character DELETE (position 7/15 of the Code Table).
Two modes of representation are given in this International Standard:
- a set of specific symbols where a single character is required for the graphical representation of each of these normally non-printing characters;
- a set of alphanumeric representations comprising two characters derived from the abbreviations used in the ISO 7-bit table.
3 REFERENCE
- ISO 646, 7-bit coded character set for information processing interchange.