※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
ISO は、この文書の実装に特許の使用が含まれる可能性があることに注意を促しています。 ISO は、請求された特許権に関する証拠、有効性、または適用可能性に関していかなる立場もとりません。この文書の発行日の時点で、ISO はこの文書の実装に必要となる可能性のある特許の通知を受け取っていません。ただし、実装者は、これが www.iso.org/patents で入手可能な特許データベースから取得できる最新の情報を表していない可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 23, 農業および林業用トラクターおよび機械、小委員会 SC 17, 手動ポータブル (手持ち式) 芝生および園芸機器および林業機械によって作成されました。
ISO 20599 のこの初版は、技術的に改訂された ISO 7293:2021 および ISO 8893:2021 を廃止し、置き換えます。
主な変更点は以下のとおりです。
- 要件は単一の国際規格に統合されました。
1 スコープ
この文書は、チェーンソー、ヘッジトリマー、刈払機、芝刈り機などの手動ポータブル (手持ち式) 動力式芝生・園芸機器および林業機械に動力を供給するために使用される内燃エンジンの性能と燃料消費量をテストする方法を指定します。 -トリマー、ポールマウント剪定ばさみ、エッジャー。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 6531, 林業用機械 — ポータブルチェーンソー — 語彙
- ISO 7112, 林業用機械 — ポータブル刈払機および草刈り機 — 語彙
- ISO 5163, 石油製品 — モーターおよび航空燃料のノック特性の測定 — モーター法
- ISO 5164, 石油製品 — モーター燃料のノック特性の測定 — 研究方法
- ISO 10517, 電動ハンドヘルドヘッジトリマー — 安全性
- ISO 11680-1, 林業用機械 — ポール取り付け式電動剪定ばさみの安全要件とテスト — Part 1: 一体型燃焼エンジンを搭載した機械
- ISO 11681-1, 林業用機械 — ポータブルチェーンソーの安全要件とテスト — Part 1: 森林サービス用チェーンソー
- ISO 11789, 剛性切断手段を備えた電動エッジャー - 定義、安全要件、およびテスト手順
- ISO 11806-1, 農業および林業機械 — ポータブル、ハンドヘルド、電動刈払機および草刈り機の安全要件とテスト — Part 1: 一体型燃焼エンジンを搭載した機械
3 用語と定義
この文書の目的のために、ISO 6531, ISO 7112, ISO 10517, ISO 11680-1, ISO 11681-1, ISO 11789, および ISO 11806-1 で与えられる用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents . ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 17, Manually portable (hand-held) powered lawn and garden equipment and forest machinery.
This first edition of ISO 20599 cancels and replaces ISO 7293:2021 and ISO 8893:2021, which have been technically revised.
The main changes are as follows:
- the requirements have been combined into a single International Standard.
1 Scope
This document specifies a method for testing the performance and fuel consumption of internal combustion engines used to power manually portable (hand-held) powered lawn and garden equipment and forest machinery, for example, chain-saws, hedge trimmers, brush-cutters, grass-trimmers, pole-mounted pruners, and edgers.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 6531, Machinery for forestry — Portable chain-saws — Vocabulary
- ISO 7112, Machinery for forestry — Portable brush-cutters and grass-trimmers — Vocabulary
- ISO 5163, Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method
- ISO 5164, Petroleum products — Determination of knock characteristics of motor fuels — Research method
- ISO 10517, Powered hand-held hedge trimmers — Safety
- ISO 11680-1, Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 1: Machines fitted with an integral combustion engine
- ISO 11681-1, Machinery for forestry — Portable chain-saw safety requirements and testing — Part 1: Chain-saws for forest service
- ISO 11789, Powered edgers with rigid cutting means — Definitions, safety requirements and test procedures
- ISO 11806-1, Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 1: Machines fitted with an integral combustion engine
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 6531, ISO 7112, ISO 10517, ISO 11680-1, ISO 11681-1, ISO 11789 and ISO 11806-1 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses: