※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 21078-2 は、ISO/TC 33耐火物技術委員会によって作成されました。
ISO 21078 は、耐火物製品中の酸化ホウ素(III) の測定6 という一般タイトルのもと、次の部分で構成されています。
- Part 1: セラミック、ガラス、釉薬用の酸化物材料中の総酸化ホウ素の測定
- Part 2: バインダー成分中の酸化ホウ素(III) を測定するための酸抽出法
1 スコープ
ISO 21078 のこの部分では、酸抽出法を使用して、アルミノケイ酸塩耐火物に添加される結合剤成分として使用される酸化ホウ素(III) を定量するための化学分析手順を規定しています。
酸化ホウ素(III)含有量が1%(質量分率)未満の耐火物に適用可能です。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 31-0, 数量と単位 - Part 0: 一般原則
- ISO 836, 耐火物の用語
- ISO 3310-1, 試験用ふるい — 技術要件と試験 — Part 1: 金属ワイヤークロスの試験用ふるい
- ISO 3696, 分析実験室用水 — 仕様と試験方法
3 用語と定義
この文書の目的のために、ISO 836 および以下に示されている用語と定義が適用されます。
3.1
乾式不定形耐火物
不定形耐火物の乾燥粒子および/または粉末
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 21078-2 was prepared by Technical Committee ISO/TC 33, Refractories.
ISO 21078 consists of the following parts, under the general title Determination of boron(III) oxide in refractory products6:
- Part 1: Determination of total boric oxide in oxidic materials for ceramics, glass and glazes
- Part 2: Acid extraction method for the determination of boron(III) oxide in binder components
1 Scope
This part of ISO 21078 specifies procedures of chemical analysis for the determination of boron(III) oxide used as a binder component added to aluminosilicate refractories, using an acid extraction method.
It is applicable for refractories containing less than 1 % (mass fraction) of boron(III) oxide.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 31-0, Quantities and units — Part 0: General principles
- ISO 836, Terminology for refractories
- ISO 3310-1, Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth
- ISO 3696, Water for analytical laboratory use — Specification and test methods
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 836 and the following apply.
3.1
dry unshaped refractories
dry particles and/or powder of unshaped refractories