※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 21179 は、技術委員会 ISO/TC 41, プーリーおよびベルト (Veebelts を含む) 、サブ委員会 SC 3, コンベヤベルトによって作成されました。
この第 2 版は、第 1 版 (ISO 21179:2005) を廃止し、置き換えるものであり、そのマイナーリビジョンを構成します。
1 スコープ
この国際規格は、ISO 21183-1 に従って、走行中の光コンベア ベルトによって生成される静電界を測定するための試験方法を指定します。
多くの場合、軽量コンベア ベルトの帯電防止動作は、ISO 21178 に準拠した電気抵抗の測定では十分に説明できないため、この動的手順が必要となります。
2 規範的参照
以下の文書は、全部または一部がこの文書で規範的に参照されており、その適用には不可欠です。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
参考文献
| 1 | ISO 21178, 軽量コンベヤベルト - 電気抵抗の測定 |
| 2 | ISO 21183-1, 軽量コンベヤベルト — Part 1: 主な特性と用途 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 21179 was prepared by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts), Subcommittee SC 3, Conveyor belts.
This second edition cancels and replaces the first edition (ISO 21179:2005), of which it constitutes a minor revision.
1 Scope
This International Standard specifies a test method for the determination of the electrostatic field generated by a running light conveyor belt according to ISO 21183-1.
This dynamic procedure is required because the antistatic behaviour of light conveyor belts cannot in many cases be sufficiently described by measurement of the electrical resistances in accordance with ISO 21178.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable to its application. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 22, Belt drives — Flat transmission belts and corresponding pulleys — Dimensions and tolerances
- ISO 4287, Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
- ISO 18573, Conveyor belts — Test atmospheres and conditioning periods
- ISO 21181, Light conveyor belts — Determination of the relaxed elastic modulus
Bibliography
| 1 | ISO 21178, Light conveyor belts — Determination of electrical resistances |
| 2 | ISO 21183-1, Light conveyor belts — Part 1: Principal characteristics and applications |