※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
ISO は、この文書の実装に特許の使用が含まれる可能性があることに注意を促しています。 ISO は、請求された特許権に関する証拠、有効性、または適用可能性に関していかなる立場もとりません。この文書の発行日の時点で、ISO はこの文書の実装に必要となる可能性のある特許の通知を受け取っていません。ただし、実装者は、これが www.iso.org/patents で入手可能な特許データベースから取得できる最新の情報を表していない可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html
この文書は ISO/TC 54, エッセンシャルオイル技術委員会によって作成されました。
この初版は、技術的に改訂された ISO/TS 211:2014 を取り消し、置き換えます。
主な変更点は以下のとおりです。
- タイトルが更新されました。
- 第 2 条 (規範的参照) が追加されました。
- 参考文献が改訂されました。
1 スコープ
この文書は、内容物を識別できるようにするための、エッセンシャル オイルの容器のラベルとマーキングに関する一般要件を指定します。
2 規範的参照
この文書には規範的な参照はありません。
3 用語と定義
この文書の目的上、次の用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
ラベリング
容器の一部を形成しないラベル、ネックレス、銘板などを用いて、容器の内容物の識別と特徴付けを可能にするプロセス。
3.2
マーキング
容器の一部を形成するマーク、スタンプ、絵などによって容器の内容物の識別と特徴付けを可能にするプロセス
参考文献
| 1 | 2008 年 12 月 16 日付の欧州議会および理事会の規則 (EC) No 1272/2008 は、物質および混合物の分類、ラベル表示および包装に関するものであり、指令 67/548/EEC および 1999/45/EC を修正および反復し、規則を修正しています ( EC) No 1907/2006 |
| 2 | 食品医薬品局 — 21 CSR — 化粧品の表示に関するPart 1 (701) |
| 3 | 食品への使用を目的とした芳香に関する1991年4月11日付けの政令91-366, 1991年4月17日付けの官報に掲載、1992年8月17日付けの政令92-814により修正、1992年8月22日付けのフランス官報に掲載 |
| 4 | ISO 4720, エッセンシャルオイル — 命名法 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents . ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 54, Essential oils.
This first edition cancels and replaces ISO/TS 211:2014, which has been technically revised.
The main changes are as follows:
- title has been updated;
- Clause 2 (Normative references) has been added;
- bibliography has been revised.
1 Scope
This document specifies the general requirements for the labelling and marking of containers for essential oils to enable the identification of the contents.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
3.1
labelling
process that permits the identification and characterization of the contents of a container by means of a label, a necklace, an inscription, etc., which does not form part of the container
3.2
marking
process that permits the identification and characterization of the contents of a container by means of a mark, a stamp, a picture, which forms part of the container
Bibliography
| 1 | Regulation (EC) No 1272/2008 of the European Parliament and the Council dated 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006 |
| 2 | Food and Drugs Administration — 21 CSR — Part 1 (701) relating to labelling of cosmetic products |
| 3 | Decree 91-366 dated 11 April 1991 relating to the aromas intended for use in foodstuffs, published in the Official Journal dated 17 April 1991, modified by the decree 92-814 dated 17 August 1992, published in the French Official Journal dated 22 August 1992 |
| 4 | ISO 4720, Essential oils — Nomenclature |