この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則に対する ISO の遵守に関する情報については、 www を参照してください。 .iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 112, 真空技術によって作成されました。
この第 2 版は、第 1 版 (ISO 21358:2007) を取り消して置き換えるものであり、そのマイナー リビジョンを構成します。前作からの変更点は以下の通り。
- 規範的な参照が更新されました。
序章
直角バルブは実際の使用状況でパイプライン継手の一部として真空システムに組み込まれることが多いという事実にもかかわらず、以前は直角バルブの取り付け寸法に関する国際規格はありませんでした。
本書は、管継手の取付寸法を規格化した ISO 9803 シリーズの改訂に合わせて作成したものです。空気圧アクチュエータのインターフェースも標準化されています。
1 スコープ
この文書は、ISO 9803-1 および ISO 9803-2 で定義されているエルボの取り付け寸法と互換性のある直角バルブの寸法を定義しています。
この文書は、ISO 2861, ISO 1609, および ISO 3669 で定義されたフランジ付き直角バルブを対象としています。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
このドキュメントの目的のために、ISO 1609 および ISO 2861 に記載されている用語と定義が適用されます。
ISO および IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
参考文献
| [1] | ISO 3, 優先番号 — 一連の優先番号 |
| [2] | ISO 9803-1, 真空技術 — パイプライン継手の取り付け寸法 — Part 1: 非ナイフエッジ フランジ タイプ |
| [3] | ISO 9803-2, 真空技術 — パイプライン継手の取り付け寸法 — Part 2: ナイフエッジ フランジ タイプ |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 112, Vacuum technology.
This second edition cancels and replaces the first edition (ISO 21358:2007), of which it constitutes a minor revision. The changes compared to the previous edition are as follows:
- the normative references have been updated.
Introduction
There had previously been no International Standard for the mounting dimensions of right‑angle valves, in spite of the fact that right‑angle valves are frequently incorporated in vacuum systems as part of pipeline fittings in practical situations of use.
This document was prepared in accordance with the revision of the ISO 9803 series in which the mounting dimensions of pipeline fittings have been standardized. Interfaces for pneumatic actuators have also been standardized.
1 Scope
This document defines dimensions of right-angle valves that are compatible with the mounting dimensions of elbows defined in ISO 9803-1 and ISO 9803-2.
This document covers right-angle valves with flanges defined in ISO 2861, ISO 1609 and ISO 3669.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1609, Vacuum technology — Dimensions of non-knife edge flanges
- ISO 2861, Vacuum technology — Dimensions of clamped-type quick-release couplings
- ISO 3669, Vacuum technology — Dimensions of knife-edge flanges
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 1609 and ISO 2861 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| [1] | ISO 3, Preferred numbers — Series of preferred numbers |
| [2] | ISO 9803-1, Vacuum technology — Mounting dimensions of pipeline fittings — Part 1: Non knife-edge flange type |
| [3] | ISO 9803-2, Vacuum technology — Mounting dimensions of pipeline fittings — Part 2: Knife-edge flange type |