※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www を 参照してください。 .iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 10, 技術製品文書、小委員会 SC 6, 機械工学文書によって作成されました。
1 スコープ
この文書は、機械製品デジタルマニュアルの構成、基本原則、作成手順、一般要件、詳細要件、発行・申請要件、管理要件などを定めたものです。
この文書は、製品の使用、修理、メンテナンスに関するガイダンスを提供するデジタルマニュアルの作成におけるガイダンスとして使用することを目的としています。また、生産や製造における参考として使用することも目的としています。
本書は特定のソフトウェアの機能やデータ構造を規定するものではありません。
この文書は、サービス部品表およびモジュール化された技術情報に基づいた機械製品のデジタルマニュアルの作成に適用されます。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 16792:2015, 製品技術文書 — デジタル製品定義データの実践
- ISO 17599:2015, 技術製品文書 (TPD) — 機械製品のデジタル モックアップの一般要件
- IEC 82079-1:2012, 使用説明書の作成 — 構造、内容および表示 — 第 1 Part: 一般原則および詳細要件
3 用語と定義
この文書の目的上、次の用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
デジタルマニュアル
製品情報を説明する文書。その内容は構造化された方法で構成され、主に 3 次元モデルで表現され、電子または紙の形式で発行され、製品の使用、修理、メンテナンスのガイドとして使用されます。
3.2
エンジニアリング部品表
原材料のサイズと材料の仕様を含む設計エンジニアリング構成を構成する部品番号とアセンブリのリスト
[出典:ISO 10303-240:2005, 3.4.3, 修正 - 冠詞「the」を削除]
3.3
サービス部品表
アフターサービスの要求に基づいてリストされた、完全な機械、コンポーネント、部品の品目と数量、およびそれらのサービス属性に関する請求書
3.4
データ要素
データの基本単位。その定義、識別、表現、または許容値は、メタデータとして知られる一連のプロパティによって規定される場合があります。
3.5
データモジュール
モデル、テキスト、画像、音声、ビデオを使用して機械製品の構造、性能、操作手順を説明する独立した完全なデータ単位
3.6
テンプレート
電子マニュアルを作成するための固定フォーマットの電子文書
3.7
製品タイプのサービス部品表
アフターサービスの要求に基づいてリストされた、完全な機械、コンポーネント、部品の品目と数量、およびそれらのサービス属性に関する製品タイプの請求書
3.8
構成情報
製品またはサービスの設計、実現、検証、運用およびサポートに関する要件
[出典:ISO 10007:2017, 3.5]
3.9
製品インスタンスのサービス部品表
アフターサービスの要求に基づいてリストされた、完全な機械、コンポーネント、部品、およびそれらのサービス属性の品目と数量に関する製品インスタンスの請求書
参考文献
| 1 | ISO 10007:2017, 品質管理 — 構成管理のガイドライン |
| 2 | ISO 10303-240:2005, 産業オートメーション システムと統合 - 製品データの表現と交換 - Part 240: アプリケーション プロトコル: 機械加工製品のプロセス プラン |
| 3 | ISO/IEC Guide 37:2012, 消費者による製品の使用説明書 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 10, Technical product documentation, Subcommittee SC 6, Mechanical engineering documentation.
1 Scope
This document specifies the composition, basic principles, preparation process, general requirements, detailed requirements, publication and application requirements, and management requirements of mechanical product digital manuals.
This document is intended to be used for guidance in the preparation of digital manuals, which provide guidance in the use, repair and maintenance of products. It is also intended to be used for reference in production and manufacturing.
This document does not specify function or data structure of any specific software.
This document applies to the preparation of mechanical product digital manuals based on service bills of material and modularized technical information.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 16792:2015, Technical product documentation — Digital product definition data practices
- ISO 17599:2015, Technical product documentation (TPD) — General requirements of digital mock-up for mechanical products
- IEC 82079-1:2012, Preparation of instructions for use — Structuring, content and presentation — Part 1: General principles and detailed requirements
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
digital manual
document that describes product information, whose contents are organized in a structured way, mainly expressed by three-dimensional models, published in either electronic or paper form and used to guide the use, repair and maintenance of products
3.2
engineering bill of materials
list of part numbers and assemblies that make up the design engineering configuration that contains the raw stock size and the material specification
[SOURCE:ISO 10303-240:2005, 3.4.3, modified — the article “the” is deleted.]
3.3
service bill of materials
bill about the items and quantities of the complete machine, components, parts and their service attributes, which is listed based on demands of after-sale service
3.4
data element
basic unit of data, of which the definition, identification, expression or allowable value may be stipulated by a set of properties known as metadata
3.5
data module
independent and complete data unit that describes the structure, performance and operational steps of mechanical products using models, text, pictures, audio and video
3.6
template
electronic document with a fixed format for preparing digital manuals
3.7
service bill of materials for product type
bill for product type about the items and quantities of the complete machine, components, parts and their service attributes, which is listed based on demands of after-sale service
3.8
configuration information
requirements for product or service design, realization, verification, operation and support
[SOURCE:ISO 10007:2017, 3.5]
3.9
service bill of materials for product instance
bill for product instance about the items and quantities of the complete machine, components, parts and their service attributes, which is listed based on demands of after-sale service
Bibliography
| 1 | ISO 10007:2017, Quality management — Guidelines for configuration management |
| 2 | ISO 10303-240:2005, Industrial automation systems and integration — Product data representation and exchange — Part 240: Application protocol: Process plans for machined products |
| 3 | ISO/IEC Guide 37:2012, Instructions for use of products by consumers |