※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自発的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、欧州標準化委員会 (CEN) 技術委員会 CEN/TC 343, 固体回収燃料と協力して、ISO と CEN 間の技術協力に関する協定に従って、技術委員会 ISO/TC 300, 固体回収燃料によって作成されました。 (ウィーン協定)
1 スコープ
この文書では、オーブンでサンプルを乾燥させることにより、一般的な分析サンプルの水分を測定する方法を指定します。このメソッドは、CEN/TS 15414-1 [3]1に準拠した一般的な分析サンプルの使用に適しています。すべての固体回収燃料に適用できます。
回収された固体燃料に大量の油分が含まれる場合は、カールフィッシャー法 (ISO 760 など) をお勧めします。それ以外の場合は、より低い温度 (例: 50 °C ± 10 °C) を推奨し、一定の質量が得られるまで乾燥時間を長くします。
注記水分含有量という用語は、回収された材料で使用される場合、誤解を招く可能性があります。バイオマスなどの固体の回収材料には、一般的な分析サンプルの水分含有量をオーブン乾燥によって決定する際に蒸発する可能性のあるさまざまな量の揮発性化合物 (抽出物) が含まれていることが多いためです。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 21637, 固体回収燃料 — 語彙
- ISO 21646-2 、固体回収燃料 — サンプル準備
3 用語と定義
このドキュメントの目的のために、ISO 21637 に記載されている用語と定義が適用されます。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
参考文献
| [1] | ISO 760, 水の測定 — カールフィッシャー法 (一般法) |
| [2] | ISO 5725-5, 測定方法と結果の精度 (真度と精度) — Part 5: 標準測定方法の精度を決定するための代替方法 |
| [3] | CEN/TS 15414-1, 固体回収燃料 — オーブン乾燥法を使用した水分含有量の測定 — Part 1: 参照法による全水分の測定 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 300, Solid recovered fuels, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 343, Solid recovered fuels, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
1 Scope
This document specifies a method for the determination of moisture in a general analysis sample by drying the sample in an oven. This method is suitable for use for general analysis samples in accordance with CEN/TS 15414-1[3]1 . It is applicable to all solid recovered fuels.
If solid recovered fuels contain large amounts of oil-fractions the Karl-Fischer-Method (for example ISO 760) is advisable. Otherwise, a lower temperature is recommended (e.g. 50 °C ± 10 °C) and a longer drying time until constant mass is achieved.
NOTE The term moisture content, when used with recovered materials, can be misleading since solid recovered materials, e. g. biomass, frequently contain varying amounts of volatile compounds (extractives) which can evaporate when determining the moisture content of the general analyses sample by oven drying.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 21637, Solid recovered fuels — Vocabulary
- ISO 21646 2 , Solid recovered fuels — Sample preparation
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 21637 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| [1] | ISO 760, Determination of water — Karl Fischer method (General method) |
| [2] | ISO 5725-5, Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
| [3] | CEN/TS 15414-1, Solid recovered fuels — Determination of moisture content using the oven dry method — Part 1: Determination of total moisture by a reference method |