※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 21672-2 は、技術委員会 ISO/TC 106, 歯科、小委員会 SC 4, 歯科用器具によって作成されました。
ISO 21672 は、歯科 - 歯周プローブという一般タイトルの下に、次の部分で構成されています。
- Part 1: 一般要件
- Part 2: 指定
1 スコープ
ISO 21672 のこの部分では、歯周プローブの指定を指定しています。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 1942, 歯科 - 語彙
- ISO 21672-1:2012, 歯科 — 歯周プローブ — Part 1: 一般要件
3 用語と定義
この文書の目的上、ISO 1942 および ISO 21672-1 に記載されている用語と定義、および以下が適用されます。
3.1
パターン名
メーカーが定義した歯周プローブの特定のブランド名
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 21672-2 was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee SC 4, Dental instruments.
ISO 21672 consists of the following parts, under the general title Dentistry — Periodontal probes:
- Part 1: General requirements
- Part 2: Designation
1 Scope
This part of ISO 21672 specifies the designation of periodontal probes.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1942, Dentistry — Vocabulary
- ISO 21672-1:2012, Dentistry — Periodontal probes — Part 1: General requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 1942 and ISO 21672-1 and the following apply.
3.1
pattern name
specific brand name for the periodontal probe, defined by the manufacturer