※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、次の資料を参照してください。次の URL: www.iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 61, プラスチック、小委員会 SC 9, 熱可塑性材料によって作成されました。
この第 2 版は、第 1 版 (ISO 21970-1:2018) を廃止し、置き換えるものであり、そのマイナーリビジョンを構成します。前版と比較した変更点は以下の通りです。
- データブロック1の記述を修正しました。
ISO 21970 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
1 スコープ
この文書は、仕様の基礎として使用できるポリケトン (PK) 成形および押出材料の指定システムを確立します。ポリケトンポリマー鎖は、規則的に交互に並ぶオレフィン単位とケト基から構築されます。オレフィン単位は、ランダムに分布したエチレンとプロピレンでなければなりません。
ポリケトンプラスチックの種類は、指定特性、溶融温度、溶融質量流量、荷重たわみ温度の適切なレベル、および意図された用途および/または加工方法に関する情報に基づいた分類システムによって互いに区別されます。 、重要な特性、添加剤、色、充填剤、補強材。
この指定システムは、すべてのポリケトン ターポリマーおよびブレンドに適用できます。これは、粉末、顆粒、またはペレットの形態で、未修飾、または着色剤、充填剤、またはその他の添加剤によって修飾された、通常の使用にすぐに使用できる材料に適用されます。
同じ名称を持つ材料が必ずしも同じ性能を発揮することを意味するものではありません。この文書には、材料を特定するために必要なエンジニアリング データ、性能データ、または加工条件に関するデータは提供されません。このような追加の特性が必要な場合は、ISO 21970-2 で指定されている試験方法 (該当する場合) に従って決定する必要があります。
特定の仕様を満たすポリケトンを指定するには、データ ブロック 5 に要件を指定する必要があります (4.1 を参照)
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 75-1, プラスチック — 荷重たわみ温度の決定 — Part 1: 一般試験方法
- ISO 75-2, プラスチック — 荷重下でのたわみ温度の決定 — Part 2: プラスチックとエボナイト
- ISO 1043-1, プラスチック — 記号と略語 — Part 1: 基本ポリマーとその特殊な特性
- ISO 1133-1, プラスチック — 熱可塑性プラスチックのメルトマスフローレート (MFR) およびメルトボリュームフローレート (MVR) の決定 — Part 1: 標準方法
- ISO 11357-3, プラスチック — 示差走査熱量測定 (DSC) — Part 3: 融解および結晶化の温度とエンタルピーの決定
3 用語と定義
この文書には用語や定義は記載されていません。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
参考文献
| 1 | ISO 75-3, プラスチック — 荷重たわみ温度の決定 — Part 3: 高強度熱硬化性ラミネートおよび長繊維強化プラスチック |
| 2 | ISO 1133-2, プラスチック — 熱可塑性プラスチックのメルトマスフローレート (MFR) およびメルトボリュームフローレート (MVR) の決定 — Part 2: 時間温度履歴および/または湿気の影響を受けやすい材料の方法 |
| 3 | ISO 21970-2, プラスチック — ポリケトン (PK) 成形および押出材料 — Part 2: 試験片の調製と特性の測定 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
This document was prepared by Technical committee ISO/TC 61, Plastics, Subcommittee SC 9, Thermoplastic materials.
This second edition cancels and replaces the first edition (ISO 21970-1:2018), of which it constitutes a minor revision. The changes compared to the previous edition are as follows:
- the description of Data block 1 has been corrected.
A list of all parts in the ISO 21970 series can be found on the ISO website.
1 Scope
This document establishes a system of designation for polyketone (PK) moulding and extrusion materials which may be used as the basis for specifications. Polyketone polymer chains are built up from regularly alternating olefinic units and keto groups. The olefinic units shall be randomly distributed ethylene and propylene.
The types of polyketone plastics are differentiated from each other by a classification system based on appropriate levels of the designatory properties, melting temperature, melt mass-flow rate, temperature of deflection under load and on information about the intended application and/or method of processing, important properties, additives, colour, fillers and reinforcing materials.
The designation system is applicable to all polyketone terpolymers and blends. It applies to materials ready for normal use in the form of powder, granules or pellets, unmodified or modified by colourants, fillers or other additives.
It is not intended to imply that materials having the same designation give necessarily the same performance. This document does not provide engineering data, performance data or data on processing conditions which may be required to specify a material. If such additional properties are required, they are intended to be determined in accordance with the test methods specified in ISO 21970-2, if suitable.
In order to designate a polyketone to meet particular specifications, the requirements are to be given in data block 5 (see 4.1).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 75-1, Plastics — Determination of temperature of deflection under load — Part 1: General test method
- ISO 75-2, Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
- ISO 1043-1, Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
- ISO 1133-1, Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
- ISO 11357-3, Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| 1 | ISO 75-3, Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics |
| 2 | ISO 1133-2, Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 2: Method for materials sensitive to time-temperature history and/or moisture |
| 3 | ISO 21970-2, Plastics — Polyketone (PK) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |