この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化機関 (ISO 会員団体) の世界的な連合体です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。
国際規格 ISO 2203 は ISO/TC10 技術委員会によって作成され、技術図面 が作成され、1971 年 1 月に加盟団体に配布されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | ハンガリー | ポルトガル |
| オーストリア | インド | ルーマニア |
| ベルギー | アイルランド | 南アフリカ共和国 |
| カナダ | イスラエル | スウェーデン |
| チリ | イタリア | スイス |
| チェコスロバキア | 日本 | 七面鳥 |
| デンマーク | 韓国、民主党議員の | イギリス |
| エジプト、アラブ共和国 | 韓国 | アメリカ合衆国 |
| フランス | オランダ | ソビエト連邦 |
| ドイツ | ニュージーランド | |
| ギリシャ | ノルウェー |
この文書に不承認を表明した加盟団体はなかった。
1 適用範囲と分野
この国際規格は、ウォーム ギアやチェーン ホイールを含むギアの歯部の従来の表現を確立します。詳細図や組立図などに適用されます。
基本原理として、歯車は (軸方向断面を除く) 歯のない固体部品として表されますが、細く長い鎖線のピッチ面が追加されています。
注 —統一性を図るため、この国際規格のすべての数値は第一角投影法 (方法 E) で示されています。確立された原理を損なうことなく、第 3 角投影 (方法 A) も同様に使用できることを理解してください。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO Member Bodies). The work of developing International Standards is carried out through ISO Technical Committees. Every Member Body interested in a subject for which a Technical Committee has been set up has the right to be represented on that Committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated to the Member Bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 2203 was drawn up by Technical Committee ISO/TC10, Technical drawings, and circulated to the Member Bodies in January 1971.
It has been approved by the Member Bodies of the following countries:
| Australia | Hungary | Portugal |
| Austria | India | Romania |
| Belgium | Ireland | South Africa, Rep. of |
| Canada | Israel | Sweden |
| Chile | Italy | Switzerland |
| Czechoslovakia | Japan | Turkey |
| Denmark | Korea, Dem.P.Rep. of | United Kingdom |
| Egypt, Arab Rep. of | Korea, Rep. of | U.S.A. |
| France | Netherlands | U.S.S.R. |
| Germany | New Zealand | |
| Greece | Norway |
No Member Body expressed disapproval of the document.
1 SCOPE AND FIELD OF APPLICATION
This International Standard establishes the conventional representation of the toothed portion of gears including worm gearing and chain wheels. It is applicable to detail drawings and assembly drawings.
As a fundamental principle a gear is represented (except in axial section) as a solid part without teeth, but with the addition of the pitch surface in a thin long chain line.
NOTE — For uniformity all figures in this International Standard are in first angle projection (Method E). It should be understood that the third angle projection (Method A) could equally well have been used without prejudice to the principles established.