※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 22198 は、CEN によって (EN 1773:1996 として) 作成され、特別な「迅速な手順」の下で、技術委員会 ISO/TC 38, 繊維、小委員会 SC 24, 繊維布の条件付け環境および物理試験によって採用されました。 ISO会員団体による承認と並行して。
この ISO 22198 の初版は、技術的に改訂された ISO 3932:1976 および ISO 3933:1976 を廃止し、置き換えます。
1 スコープ
この国際規格は、張力のない弛緩状態にある織物の長さと幅を決定する方法を規定しています。この試験は、全幅の織物、中央で縦方向に折り畳まれた織物、または管状の織物に適用されるが、100 m を超えない.コーティングされた生地には適用されません。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 139, テキスタイル — コンディショニングとテストのための標準的な雰囲気
- ISO 10012-1, 測定機器の品質保証要件 — Part 1: 測定機器の計量確認システム
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
3.1
ピースの長さ
縦方向または縦方向のサンプルの始点と終点の間の距離
3.2
ピースの全幅
縦方向のエッジに対して垂直に測定された、サンプルの最も外側のエッジ間の距離。
3.3
ピースの使用可能幅
生地の耳、マーク、ピンホール、その他の不均一な部分を除いた生地の幅。
注記1一部の最終用途または仕様については、利害関係者間で合意されたように、使用可能な幅が異なるように定義される場合があります。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 22198 was prepared by CEN (as EN 1773:1996) and was adopted, under a special “fast-track procedure”, by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 24, Conditioning atmospheres and physical tests for textile fabrics, in parallel with its approval by the ISO member bodies.
This first edition of ISO 22198 cancels and replaces ISO 3932:1976 and ISO 3933:1976, which have been technically revised.
1 Scope
This International Standard specifies a method for the determination of length and width of textile fabrics that are in a tension-free relaxed state. The test is applicable to textile fabrics of full width, folded lengthwise down the middle, or in tubular form, but no longer than 100 m. This International Standard does not specify a method to determine or describe construction defects or other defects. It is not applicable to coated fabrics.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 139, Textiles — Standard atmospheres for conditioning and testing
- ISO 10012-1, Quality assurance requirements for measuring equipment — Part 1: Metrological confirmation system for measuring equipment
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
length of piece
distance between the beginning and the end of the sample in the lengthwise or machine direction
3.2
overall width of piece
distance between the outermost edges of the sample measured perpendicular to the longitudinal edges
3.3
usable width of piece
width of the fabric excluding any selvedge materials, marks, pin-holes or other non-homogeneous areas of the fabric
Note 1 to entry: For some end uses or specifications, the usable width may be defined differently, as agreed between the interested parties.