※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 22538-5 は、技術委員会 ISO/TC 20, 航空機および宇宙船、小委員会 SC 14, 宇宙システムおよび運用によって作成されました。
ISO 22538 は、宇宙システム - 酸素の安全性という一般的なタイトルの下に、次の部分で構成されています。
- Part 1: 酸素システムとコンポーネントの設計
- Part 2: 酸素システムおよびコンポーネントの金属材料の選択
- Part 3: 酸素システムおよびコンポーネント用の非金属材料の選択
- Part 4: 酸素システムおよびコンポーネントのハザード分析
- Part 5: 操作手順と緊急手順
- Part 6: 施設の計画と実施
1 スコープ
ISO 22538 のこのパートでは、液体酸素と気体酸素の安全な保管、取り扱い、輸送のための一連の運用手順と緊急手順を指定しています。
参考文献
| [1] | ISO 22538-2, 宇宙システム — 酸素の安全性 — Part 2: 酸素システムおよびコンポーネントの金属材料の選択 |
| [2] | ISO 22538-3, 宇宙システム — 酸素の安全性 — Part 3: 酸素システムおよびコンポーネント用の非金属材料の選択 |
| [3] | 道路による危険物の国際運送に関する欧州協定 (ADR) |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 22538-5 was prepared by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 14, Space systems and operations.
ISO 22538 consists of the following parts, under the general title Space systems — Oxygen safety:
- Part 1: Design of oxygen systems and components
- Part 2: Selection of metallic materials for oxygen systems and components
- Part 3: Selection of non-metallic materials for oxygen systems and components
- Part 4: Hazards analyses for oxygen systems and components
- Part 5: Operational and emergency procedures
- Part 6: Facility planning and implementation
1 Scope
This part of ISO 22538 specifies a set of operational and emergency procedures for the safe storage, handling and transfer of liquid and gaseous oxygen.
Bibliography
| [1] | ISO 22538-2, Space systems — Oxygen safety — Part 2: Selection of metallic materials for oxygen systems and components |
| [2] | ISO 22538-3, Space systems — Oxygen safety — Part 3: Selection of non-metallic materials for oxygen systems and components |
| [3] | European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR) |