※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www を 参照してください。 .iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 35, 塗料およびワニス、小委員会 SC 9, 塗料およびワニスの一般試験方法によって作成されました。
1 スコープ
この文書は、通常手持ちの装填スタイラスによって生じる傷に対するコーティングの耐性を決定する方法を規定しています。
テストは、ポイント スタイラス (方法 A) またはディスク スタイラス (方法 B) を使用して実行できます。
どちらの方法も一般的に適用可能であり、曲面だけでなく現場でも使用できます。方法 A は小さな試験片 (最小寸法 30 mm × 50 mm) にも適用できます。
テストは、「合否」テスト (テスト要件 I) または分類テスト (テスト要件 II) として実行できます。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 868, プラスチックおよびエボナイト — デュロメーターによる押し込み硬さの測定 (ショア硬さ)
- ISO 2808, 塗料およびワニス - 膜厚の決定
- ISO 4618, 塗料およびワニス — 用語と定義
- ISO 13076, 塗料およびワニス — コーティングの視覚評価のための照明と手順
- ISO 14526-1, プラスチック — フェノール粉末成形材料 (PF-PMC) — Part 1: 指定システムと仕様の根拠
- CEN/TS 13388, 銅および銅合金 - 組成および製品の概要
- EN 10027-2, 鋼の指定システム - Part 2: 数値システム
3 用語と定義
この文書の目的のために、ISO 4618 および以下に示されている用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
スタイラス
指定された形状のスクラッチツール
3.2
書き込み効果
表面上を移動する装填された スタイラス (3.1) の衝撃によるコーティングの表面プロファイルの平滑化
3.3
筆記マーク
ガッシュ
連続 書き込み効果のあるスクラッチ (3.2) ダメージ
3.4
金属マーキング
金属 スタイラス (3.1) で導入され、摩耗したスタイラス素材で覆われた 筆記マーク (3.3)
参考文献
| 1 | ISO 1518-1, 塗料およびワニス — 耐傷性の測定 — Part 1: 定荷重法 |
| 2 | ISO 1518-2, 塗料およびワニス — 耐傷性の測定 — Part 2: 可変荷重法 |
| 3 | ISO 3270, 塗料およびワニスとその原材料 - 調整および試験のための温度と湿度 |
| 4 | ISO 5725-1:1994, 測定方法と結果の精度 (真性と精度) — Part 1: 一般原則と定義 |
| 5 | ISO 12137, 塗料およびワニス — 耐擦傷性の測定 |
| 6 | ISO 13076, 塗料およびワニス — コーティングの視覚的評価のための照明と手順 |
| 7 | EN 13523-12, コイル被覆金属 — 試験方法 — Part 12: 耐傷性 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 9, General test methods for paints and varnishes.
1 Scope
This document specifies a method for determining the resistance of a coating to scratches introduced by a usually hand-held loaded stylus.
The test can be carried out using a point stylus (method A) or using a disc stylus (method B).
Both methods are generally applicable and can be used in the field as well as on curved surfaces. Method A can also be applied on small test specimens (minimum dimensions 30 mm × 50 mm).
The test can be carried out as a “pass/fail” test (test requirement I) or as a classification test (test requirement II).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 868, Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
- ISO 2808, Paints and varnishes — Determination of film thickness
- ISO 4618, Paints and varnishes — Terms and definitions
- ISO 13076, Paints and varnishes — Lighting and procedure for visual assessments of coatings
- ISO 14526-1, Plastics — Phenolic powder moulding compounds (PF-PMCs) — Part 1: Designation system and basis for specifications
- CEN/TS 13388, Copper and copper alloys — Compendium of compositions and products
- EN 10027-2, Designation systems for steels — Part 2: Numerical system
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 4618 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
stylus
scratching tool with specified geometry
3.2
writing effect
smoothing of the surface profile of a coating by impact of a loaded stylus (3.1) being moved over the surface
3.3
writing mark
gash
scratch with continuous writing effect (3.2) damage
3.4
metal marking
writing mark (3.3) which is introduced with a metal stylus (3.1) and covered with abraded stylus material
Bibliography
| 1 | ISO 1518-1, Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method |
| 2 | ISO 1518-2, Paints and varnishes — Determination of scratch resistance — Part 2: Variable-loading method |
| 3 | ISO 3270, Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
| 4 | ISO 5725-1:1994, Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| 5 | ISO 12137, Paints and varnishes — Determination of mar resistance |
| 6 | ISO 13076, Paints and varnishes — Lighting and procedure for visual assessments of coatings |
| 7 | EN 13523-12, Coil coated metals — Test methods — Part 12: Resistance to scratching |