※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 33, 耐火物によって作成されました。
1 スコープ
この文書は、高温での耐火製品の圧縮強度を決定するための試験方法を規定しています。
この試験方法は、材料開発、品質管理、特性評価、設計、およびデータ生成の目的にも使用できます。
注記この文書は、還元雰囲気の気密炉内で高温で炭素含有耐火製品の圧縮強度を決定するためにも使用できます。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 5022, 成形耐火物 — サンプリングおよび受け入れ試験
- ISO 1927-2, モノリシック (不定形) 耐火製品 — Part 2: 試験のためのサンプリング
- ISO 1927-5, モノリシック (非成形) 耐火製品 — Part 5: 試験片の準備と処理
- ISO 8895, 成形断熱耐火製品 — 冷間圧壊強度の測定
- ISO 10059-1, 高密度成形耐火製品 — 冷間圧縮強度の測定 — Part 1: パッキングなしの審判試験
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
ISO および IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
3.1
高温での圧縮強度
耐火物が破損する前に耐えるであろう最大荷重 (高温で指定された条件下で適用される) を、荷重が適用される領域で割った値。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 33, Refractories.
1 Scope
This document specifies a test method for determining the compressive strength of refractory products at elevated temperature.
This test method could also be used for materials development, quality control, characterization, design and data generation purposes.
NOTE This document also could be used for determining the compressive strength of carbon containing refractory products at elevated temperature in an airtight furnace with reducing atmosphere.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 5022, Shaped refractory products — Sampling and acceptance testing
- ISO 1927-2, Monolithic (unshaped) refractory products — Part 2: Sampling for testing
- ISO 1927-5, Monolithic (unshaped) refractory products — Part 5: Preparation and treatment of test pieces
- ISO 8895, Shaped insulating refractory products — Determination of cold crushing strength
- ISO 10059-1, Dense, shaped refractory products — Determination of cold compressive strength — Part 1: Referee test without packing
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
3.1
compressive strength at elevated temperature
maximum load (applied under specified conditions at elevated temperature) divided by the area over which the load is applied, that a refractory will withstand before failure occurs