※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
ISO は、この文書の実装に特許の使用が含まれる可能性があることに注意を促しています。 ISO は、請求された特許権に関する証拠、有効性、または適用可能性に関していかなる立場もとりません。この文書の発行日の時点で、ISO はこの文書の実装に必要となる可能性のある特許の通知を受け取っていません。ただし、実装者は、これが www.iso.org/patents で入手可能な特許データベースから取得できる最新情報を表していない可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html
この文書は、欧州標準化委員会 (CEN) 技術委員会 CEN/TC 188, コンベヤ ベルトと協力して、ISO/TC 41プーリおよびベルト (Veebelts を含む)技術委員会、SC 3, コンベヤ ベルト小委員会によって作成されました。 ISO と CEN 間の技術協力に関する協定 (ウィーン協定)
この第 2 版は、技術的に改訂された第 1 版 (ISO 22721:2007) を廃止し、置き換えます。
主な変更点は以下のとおりです。
- スコープが削除される前の警告。
- 脚注と関連する幅が表 3 から削除されました。
- 編集上の変更が行われました。
1 スコープ
この文書は、地下鉱山で使用され、平らなアイドラーまたはトラフ付きアイドラーに配置される繊維構造のゴムまたはプラスチックで覆われたコンベア ベルトの要件を指定します。 ISO 21183-1 に記載されているような軽量コンベヤ ベルトには適用されません。
この文書にはプラスチック カバーの要件は含まれていません。これらは、使用されるプラスチックの種類を考慮して、製造業者と購入者によって合意されます。
この文書の要件ではないが、製造業者と購入者が合意することが推奨される関連項目は、付録 A に含まれています。
ベルトの購入者が問い合わせ時に提供することを推奨する詳細は、付録 B に記載されています。
ベルトがまっすぐに走行する能力は、ベルトが取り付けられるまで評価できません。したがって、この要件はこの文書の範囲外です。それにもかかわらず、横方向のドリフトに関する推奨事項は付録 C に記載されています。
ベルトが使用されるwhere では安全に関する規制が設けられている可能性があるので、注意が必要です。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 37, ゴム、加硫または熱可塑性プラスチック — 引張応力-ひずみ特性の決定
- ISO 188, ゴム、加硫または熱可塑性 — 加速老化試験および耐熱性試験
- ISO 252, コンベヤベルト - 構成要素間の接着 - 試験方法
- ISO 282, コンベヤベルト - サンプリング
- ISO 283, コンベヤベルト — 全厚引張強度、破断点伸びおよび基準力での伸び — 試験方法
- ISO 583, 繊維カーカスを備えたコンベヤベルト — ベルトの総厚さと構成要素の厚さ — 試験方法
- ISO 703, コンベヤベルト — 横方向の柔軟性 (トラフアビリティ) — 試験方法
- ISO 1120, コンベヤベルト — 機械的ファスナーの強度の測定 — 静的試験方法
- ISO 4649:2017, ゴム、加硫または熱可塑性 - 回転円筒ドラム装置を使用した耐摩耗性の測定
- ISO 16851, 繊維コンベア ベルト — エンドレス (スプライス) コンベア ベルトの正味長さの決定
- EN 14973, 地下施設で使用するコンベヤベルト - 電気および可燃性の安全要件
3 用語と定義
この文書の目的上、次の用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
スラブベルト
個々のコンベヤの設置に合わせて幅が広く、長さが短いコンベヤベルトを後でスリットしたり切断したりして、より狭い幅とより短い長さにすることができます。
3.2
しっかりとした織物ベルト
複数の層のカーカスから成るコンベアベルト。各層は織りの際にかみ合わされるか、織りの過程で糸を結合することによって一緒に結合されます。
3.3
モノプライベルト
1層の織布からなるカーカスを備えたコンベアベルト
3.4
デュオプライベルト
接合部に張力要素を組み込むのに十分な厚さのエラストマーの中間層によって接着された 2 層の織布からなるカーカスを備えたコンベア ベルト
3.5
多層ベルト
2 層以上の織布のカーカスを備えたコンベアベルト。隣接する層はエラストマーの中間層によって結合されています。
3.6
一次糸
全厚の引張強度の 50% 以上に寄与する耐荷重糸
3.7
二次糸
全厚の引張強度の 50% 未満しか寄与しない耐荷重糸
参考文献
| 1 | ISO 283:2023, コンベヤベルト — 全厚引張強度、破断点伸びおよび基準力での伸び — 試験方法 |
| 2 | ISO 7806, 工業用プレートスクリーン — ミシン目指定の成文化 |
| 3 | ISO 9045, 工業用スクリーンおよびスクリーニング — 語彙 |
| 4 | ISO 10247, コンベヤベルト - カバーの特性 - 分類 |
| 5 | ISO 21183-1, 軽量コンベヤベルト — Part 1: 主な特性と用途 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents . ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 41 Pulleys and belts (including veebelts), Subcommittee SC 3, Conveyor belts, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 188, Conveyor belts, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces first edition (ISO 22721:2007), which has been technically revised.
The main changes are as follows:
- the warning before the Scope was removed;
- the footnote and related widths were removed from Table 3;
- editorial changes were done.
1 Scope
This document specifies requirements for rubber- or plastics-covered conveyor belting of textile construction for use in underground mines and disposed on flat or troughed idlers. It is not applicable to light conveyor belts as described in ISO 21183-1.
This document does not include requirements for plastics covers. These are agreed upon by the manufacturer and purchaser, taking into account the type of plastics to be used.
Related items that are not requirements of this document, but which it is recommended be agreed upon by the manufacturer and purchaser, are included in Annex A.
Details recommended to be supplied by the purchaser of belting with an enquiry are given in Annex B.
The ability of a belt to run straight cannot be assessed until the belt is installed. Requirements for this are, therefore, outside the scope of this document; nevertheless, recommendations for lateral drift are given in Annex C.
Attention is drawn to local regulations for safety which might be in place where the belts are to be used.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 37, Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
- ISO 188, Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
- ISO 252, Conveyor belts — Adhesion between constitutive elements — Test methods
- ISO 282, Conveyor belts — Sampling
- ISO 283, Conveyor belts — Full thickness tensile strength, elongation at break and elongation at the reference force — Test method
- ISO 583, Conveyor belts with a textile carcass — Total belt thickness and thickness of constitutive elements — Test methods
- ISO 703, Conveyor belts — Transverse flexibility (troughability) — Test method
- ISO 1120, Conveyor belts — Determination of strength of mechanical fastenings — Static test method
- ISO 4649:2017, Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
- ISO 16851, Textile conveyor belts — Determination of the net length of an endless (spliced) conveyor belt
- EN 14973, Conveyor belts for use in underground installations — Electrical and flammability safety requirements
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
3.1
slab belting
conveyor belting made in wide widths and long lengths for subsequent slitting and cutting into narrower widths and shorter lengths to suit individual conveyor installations
3.2
solid woven belting
conveyor belting consisting of a carcass of more than one ply, the plies being interlocked in the weave or bound together by binding threads in the course of weaving
3.3
mono-ply belting
conveyor belting with a carcass consisting of one ply of woven fabric
3.4
duo-ply belting
conveyor belting with a carcass consisting of two plies of woven fabric bonded together by an intermediate layer of elastomer of sufficient thickness to allow the incorporation of a tension element in the joint
3.5
multi-ply belting
conveyor belting with a carcass of two or more plies of woven fabric, the adjacent plies being bonded together by an intermediate layer of elastomer
3.6
primary yarn
load-carrying yarn which contributes more than 50 % of the full thickness tensile strength
3.7
secondary yarn
load-carrying yarn which contributes less than 50 % of the full thickness tensile strength
Bibliography
| 1 | ISO 283:2023, Conveyor belts — Full thickness tensile strength, elongation at break and elongation at the reference force — Test method |
| 2 | ISO 7806, Industrial plate screens — Codification for designating perforations |
| 3 | ISO 9045, Industrial screens and screening — Vocabulary |
| 4 | ISO 10247, Conveyor belts — Characteristics of covers — Classification |
| 5 | ISO 21183-1, Light conveyor belts — Part 1: Principal characteristics and applications |