ISO 22915-16:2014 産業用トラック—安定性の検証—パート16：歩行者推進トラック | ページ 2

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patents

Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.

For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information

The committee responsible for this document is ISO/TC 110, Industrial trucks, Subcommittee SC 2, Safety of industrial trucks.

ISO 22915 consists of the following parts, under the general title Industrial Trucks — Verification of stability:

• Part 1: General
• Part 2: Counterbalanced trucks with mast
• Part 3: Reach and straddle trucks
• Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height
• Part 5: Single-side-loading trucks
• Part 7: Bidirectional and multidirectional trucks
• Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated
• Part 9: Counterbalanced trucks with mast handling freight containers of 6 m (20 ft) length and longer
• Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
• Part 11: Industrial variable-reach trucks
• Part 12: Industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer
• Part 13: Rough-terrain trucks with mast
• Part 14: Rough-terrain variable-reach trucks
• Part 15: Counterbalanced trucks with articulated steering
• Part 16: Pedestrian-propelled trucks
• Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization
• Part 21: Order-picking trucks with operator position elevating above 1 200 mm
• Part 22: Lateral- and front- stacking trucks with and without elevating operator position

The following parts are under preparation:

• Part 24: Slewing variable-reach trucks

Industrial and RTT lorry-mounted trucks are to form the subject of a future part 23.

1 Scope

This part of ISO 22915 specifies tests for verifying the stability of pedestrian-propelled trucks.

It is applicable to

• straddle, pallet and platform stacker trucks with capacities not exceeding 1 000kg, with manual or battery-powered lift;
• scissors lift pallet trucks with lift heights up to 1 000 mm and rated capacity up to 1 000kg, with manual or battery-powered lift;
• platform trucks.

It also applies to trucks operating under the same conditions when equipped with load-handling attachments.

It is not applicable to trucks with retractable devices such as a mast or fork.

2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO 5053 and ISO 22951-1 apply.