※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 45, ゴムおよびゴム製品、小委員会 SC 3, ゴム産業で使用するための原材料 (ラテックスを含む) によって作成されました。
この第 7 版は、技術的に改訂された第 6 版 (ISO 2302:2014) を取り消して置き換えるものです。
前作からの主な変更点は以下の通り。
- ISO 247 が ISO 247-1 および ISO 247-2 に置き換えられた条項 2, 5.3, および条項 10 d) の規範的参照が更新されました。
- ISO 3417 が ISO 6502-2 に置き換えられた第 2 条 6.2.2.3 j) および 7.1 で、引用規格が更新されました。
- 表 1 に脚注が追加され、TMDT を別の治療薬に置き換えることができるようになりました。
警告このドキュメントのユーザーは、通常の実験室の慣行に精通している必要があります。このドキュメントは、その使用に関連する安全上の問題のすべてに対処することを目的としていません。適切な安全衛生慣行を確立することは、ユーザーの責任です。
1 スコープ
このドキュメントは以下を指定します:
- 生ゴムの物理的および化学的試験、および
- あらゆる種類のイソブテン-イソプレンゴム (IIR) の加硫特性を評価するための標準化された材料、標準化された試験配合、装置、および処理方法。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 37, ゴム、加硫または熱可塑性 — 引張応力-ひずみ特性の測定
- ISO 247-1:2018, ゴム — 灰分の測定 — Part 1: 燃焼法
- ISO 247-2:2018, ゴム — 灰分の測定 — Part 2: 熱重量分析 (TGA)
- ISO 248-1, ゴム、生 — 揮発性物質含有量の測定 — Part 1: ホットミル法およびオーブン法
- ISO 248-2, ゴム、生 — 揮発性物質含有量の測定 — Part 2: 赤外線乾燥ユニットを備えた自動分析装置を使用した熱重量法
- ISO 289-1, ゴム、未加硫 — せん断ディスク粘度計を使用した測定 — Part 1: ムーニー粘度の測定
- ISO 1795:2017, ゴム、未加工の天然および未加工の合成 — サンプリングおよびさらなる調製手順
- ISO 2393, ラバー テスト ミックス — 準備、混合および加硫 — 機器および手順
- ISO 6502-1, ゴム — 硬化計を使用した加硫特性の測定 — Part 1: はじめに
- ISO 6502-2, ゴム — 硬化計を使用した加硫特性の測定 — Part 2: 振動ディスク硬化計
- ISO 23529, ゴム — 物理的試験方法のための試験片の準備とコンディショニングの一般的な手順
3 用語と定義
このドキュメントには、用語と定義は記載されていません。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
参考文献
| [1] | ISO/TR 9272 1 、ゴムおよびゴム製品 - 試験方法規格の精度の決定 |
| [2] | ASTM D3188-95, ゴムの標準試験方法 — IIR (イソブテン-イソプレンゴム) の評価 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 3, Raw materials (including latex) for use in the rubber industry.
This seventh edition cancels and replaces the sixth edition (ISO 2302:2014), which has been technically revised.
The main changes compared to the previous edition are as follows:
- the normative references have been updated in Clause 2, 5.3 and Clause 10 d), where ISO 247 has been replaced by ISO 247-1 and ISO 247-2;
- the normative references have been updated in Clause 2, 6.2.2.3 j) and 7.1, where ISO 3417 has been replaced by ISO 6502-2;
- a footnote has been added to Table 1 allowing the possibility to replace TMDT by an alternative curative.
WARNING Users of this document should be familiar with the normal laboratory practice. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices.
1 Scope
This document specifies:
- the physical and chemical tests on raw rubbers, and
- the standardized materials, a standardized test formulation, equipment, and processing methods for evaluating the vulcanization characteristics of all types of isobutene-isoprene rubber (IIR).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 37, Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
- ISO 247-1:2018, Rubber — Determination of ash — Part 1: Combustion method
- ISO 247-2:2018, Rubber — Determination of ash — Part 2: Thermogravimetric analysis (TGA)
- ISO 248-1, Rubber, raw — Determination of volatile-matter content — Part 1: Hot-mill method and oven method
- ISO 248-2, Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
- ISO 289-1, Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity
- ISO 1795:2017, Rubber, raw natural and raw synthetic — Sampling and further preparative procedures
- ISO 2393, Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures
- ISO 6502-1, Rubber — Measurement of vulcanization characteristics using curemeters — Part 1: Introduction
- ISO 6502-2, Rubber — Measurement of vulcanization characteristics using curemeters — Part 2: Oscillating disc curemeter
- ISO 23529, Rubber — General procedures for preparing and conditioning test pieces for physical test methods
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| [1] | ISO/TR 9272 1 , Rubber and rubber products — Determination of precision for test method standards |
| [2] | ASTM D3188-95, Standard Test Methods for Rubber — Evaluation of IIR (Isobutene-Isoprene Rubber) |