※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www.iso.org/iso/foreword.html を参照してください。
この文書は ISO/TC 206, ファインセラミックス技術委員会によって作成されました。
1 スコープ
この文書は、室温での化学蒸着 (CVD) セラミック コーティング (厚さ > 0.03 mm) の 2 300 K までの熱膨張係数と残留応力を測定するための試験方法を規定しています。試験片の準備、試験モード、加熱速度、データ収集、特性計算および報告手順の手順が説明されています。
この文書は、金属またはセラミック基板上の CVD セラミック コーティングに適用されます。この試験方法は、材料研究、品質管理、特性評価、設計データ生成の目的に使用できます。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
この文書の目的上、次の用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
相対法
測定パラメータを取得するための間接テスト方法
注記 1:期待されるパラメータ A は通常、直接測定することが困難ですが、パラメータ B および C は既知のパラメータであるか、または簡単に取得できます。 A = f (B, C) という解析関係が成立すれば、パラメータ A を計算できます。
3.2
線熱膨張
材料が温度変化にさらされたときに生じる、一次元の正または負の変化
参考文献
| 1 | Wei CG, Liu ZQ, Bao YW, Wan DT, Qiu Y.、Liu XG, 相対法によるセラミック コーティングの熱膨張係数と密度の評価、マテリアル レターズ、vol. 161, 542–544ページ、2015年 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 206, Fine ceramics.
1 Scope
This document specifies a test method for determining thermal expansion coefficient up to 2 300 K and the residual stress of chemical vapour deposition (CVD) ceramic coatings (thickness > 0,03 mm) at room temperature. Procedures for test piece preparation, test modes, heat rate, data collection, property calculations and reporting procedures are given.
This document applies to CVD ceramic coatings on metal or ceramic substrates. This test method can be used for material research, quality control, characterization and design data-generation purposes.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 3611, Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics
- ISO 17139, Fine ceramics (advanced ceramics, advanced technical ceramics) — Thermophysical properties of ceramic composites — Determination of thermal expansion
- ISO 19603, Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus and bending strength of thick ceramic coatings
- IEC 60584-1, Thermocouples — Part 1: EMF specifications and tolerances
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
relative method
indirect test method to obtain the measured parameter
Note 1 to entry: The expected parameter A is usually difficult to measure directly, but parameters B and C are known parameters or easy to obtain. If the analytical relationship of A = f (B, C) is established, the parameter A can be calculated.
3.2
linear thermal expansion
positive or negative change in one dimension that occurs when a material is subjected to a change in temperature
Bibliography
| 1 | Wei C. G., Liu Z. Q., Bao Y. W., Wan D. T., Qiu Y., Liu X. G., Evaluating thermal expansion coefficient and density of ceramic coatings by relative method, Materials Letters, vol. 161, pp. 542–544, 2015 |