この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における ISO の WTO 原則への準拠に関する情報については、次の URL を参照して ください 。
この文書を担当する委員会は、ISO/TC 61, プラスチック、小委員会 SC 11, 製品です。
この第 2 版は、技術的に改訂された第 1 版 (ISO 23560:2008) を取り消して置き換えるものです。
序章
国家間の貿易障壁の撤廃に伴い、穀物などの食料品の包装、輸送、保管に関する国際規格が必要になっています。織物から作られたポリプロピレン (PP) 袋は、食品の包装に最適です。このような袋は、食品グレードのポリプロピレンから製造され、保管と輸送に必要な機械的強度を確保します。
この国際規格は、袋の構造、寸法、および袋に入った食品の長期保管と輸送を保証するのに適した試験方法について説明しています。
1 スコープ
この国際規格は、織られたポリプロピレン (PP) 袋の一般的な特性、要件、および試験方法を指定しています。シリアル、砂糖、豆類などの食料品の輸送と保管を目的とした、50 kg または 25 kg の容量を持つ PP 織物袋に適用できます。
2 参考文献
以下のドキュメントの全体または一部は、このドキュメントで規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 291, プラスチック - コンディショニングとテストのための標準的な雰囲気
- ISO 3451-1:2008, プラスチック — 灰分の測定 — Part 1: 一般的な方法
- ISO 4892-3:2013, プラスチック - 実験用光源への暴露方法 - Part 3: 蛍光 UV ランプ
- ISO 4915, テキスタイル — ステッチの種類 — 分類と用語
- ISO 6591-2, 包装 - 袋 - 測定の説明と方法 - Part 2: 熱可塑性軟質フィルム製の空袋
- ISO 13934-1, テキスタイル — ファブリックの引張特性 — Part 1: ストリップ法を使用した最大力と最大力での伸びの決定
- ISO 13935-1, テキスタイル — 布地および製造された繊維製品の縫い目引張特性 — Part 1: ストリップ法を使用した縫い目破断に対する最大力の決定
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
3.1
編まれたPP袋
ポリプロピレン (PP) 織布でできた容器で、一端が閉じており、特定の場合には他の柔軟な材料と組み合わせて使用されます。
参考文献
| [1] | ISO 2206, パッケージング - 完全な、充填された輸送パッケージ - テスト時の部品の識別 |
| [2] | ISO 2233, パッケージング - 完全な、充填された輸送パッケージおよびユニット ロード - テスト用のコンディショニング |
| [3] | ISO 3676, 梱包 — 完全な、充填された輸送パッケージおよび単位荷重 — 単位荷重の寸法 |
| [4] | ISO 4892-1, プラスチック — 実験室の光源への暴露方法 — Part 1: 一般的なガイダンス |
| [5] | ISO 7023, 包装 — 袋 — 試験用に空の袋をサンプリングする方法 |
| [6] | ISO 7965-2, サック — 落下試験 — Part 2: 熱可塑性の柔軟なフィルムで作られたサック |
| [7] | ISO 17557, プラスチック - フィルムおよびシート - キャスト ポリプロピレン (PP) フィルム |
| [8] | ISO 21898, 包装 — 非危険物用の柔軟な中間バルク コンテナー (FIBC) |
| [9] | EN 277, 食糧援助の輸送用サック — ポリプロピレン織物製のサック |
| [10] | EN 1086, 食糧援助の輸送のための袋 — 包装される製品に関連する袋の種類とライナーの選択に関する推奨事項 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 61, Plastics, Subcommittee SC 11, Products.
This second edition cancels and replaces the first edition (ISO 23560:2008), which has been technically revised.
Introduction
With the removal of trade barriers between nations, there is a need for an International Standard for the packaging, transportation, and storage of foodstuffs such as cereals. Polypropylene (PP) sacks made from woven fabric are an ideal choice for the packaging of foodstuffs. Such sacks are produced from food-grade polypropylene and ensure the mechanical strength needed for storage and transportation.
This International Standard describes the construction of the sacks, their dimensions, and test methods suitable for ensuring the long-term storage and transportation of foodstuffs in the sacks.
1 Scope
This International Standard specifies the general characteristics, requirements, and methods of test for woven polypropylene (PP) sacks. It is applicable to woven PP sacks, having a capacity of 50 kg or 25 kg, intended for the transport and storage of foodstuffs, such as cereals, sugar, and pulses.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 291, Plastics — Standard atmospheres for conditioning and testing
- ISO 3451-1:2008, Plastics — Determination of ash — Part 1: General methods
- ISO 4892-3:2013, Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
- ISO 4915, Textiles — Stitch types — Classification and terminology
- ISO 6591-2, Packaging — Sacks — Description and method of measurement — Part 2: Empty sacks made from thermoplastic flexible film
- ISO 13934-1, Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
- ISO 13935-1, Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
woven PP sack
container made of woven polypropylene (PP) fabric, closed at one end, in certain cases combined with other flexible materials used, for instance, for the liner to provide the properties required for filling, storage, and distribution of the packaged commodity
Bibliography
| [1] | ISO 2206, Packaging — Complete, filled transport packages — Identification of parts when testing |
| [2] | ISO 2233, Packaging — Complete, filled transport packages and unit loads — Conditioning for testing |
| [3] | ISO 3676, Packaging — Complete, filled transport packages and unit loads — Unit load dimensions |
| [4] | ISO 4892-1, Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
| [5] | ISO 7023, Packaging — Sacks — Method of sampling empty sacks for testing |
| [6] | ISO 7965-2, Sacks — Drop test — Part 2: Sacks made from thermoplastic flexible film |
| [7] | ISO 17557, Plastics — Film and sheeting — Cast polypropylene (PP) films |
| [8] | ISO 21898, Packaging — Flexible intermediate bulk containers (FIBCs) for non-dangerous goods |
| [9] | EN 277, Sacks for the transport of food aid — Sacks made of woven polypropylene fabric |
| [10] | EN 1086, Sacks for the transport of food aid — Recommendations on the selection of type of sack and the liner in relation to the product to be packed |