この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則に対する ISO の遵守に関する情報については、 www を参照してください。 .iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 28, 石油および関連製品、天然または合成源からの燃料および潤滑油によって作成されました。
序章
このドキュメントは、次の手順を提供するために作成されました。
- 製造工場段階での生産試験用のグリース サンプルの準備。
- 納品先でサンプルを採取。
調合工場で製造ロットをサンプリングするか、出荷先でサンプリングを行うかによって、サンプルの作成方法や作成方法が異なります。
ISO 3170 は、手動手段によるタンク、ドラム、またはパイプラインからの液体/半液体炭化水素の手動サンプリングを対象としていますが、グリースのサンプリングは含まれていません。
ASTM D 4057 [1]および DIN 51750-3 [2]には、グリースのサンプリングに関する特定の手順が含まれています。 ASTM D 4057 には、製造段階でのグリースのサンプリングに関する特定の規定が含まれています。
警告このドキュメントの使用には、危険な物質、操作、および機器が含まれる場合があります。このドキュメントは、その使用に関連するすべての安全上の問題に対処することを意図していません。この文書のユーザーは、標準を適用する前に人員の安全と健康を確保するための適切な措置を講じ、この目的のために他の制限が適用されるかどうかを判断する責任があります。
1 スコープ
この文書は、製造ロットまたは出荷から潤滑グリースのサンプルを取得する方法を指定し、販売パッケージのグリースを検査するための指示を示します。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 3170:2004, 石油液体 - 手動サンプリング
3 用語と定義
このドキュメントには、用語と定義は記載されていません。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
参考文献
| [1] | ASTM D 4057, 石油および石油製品の手動サンプリングの標準プラクティス |
| [2] | DIN 51750-3, ペースト状および固形石油製品のサンプリング |
| [3] | ISO 2137, 石油製品および潤滑油 — 潤滑グリースおよびペトロラタムのコーン貫入の測定 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 28, Petroleum and related products, fuels and lubricants from natural or synthetic sources.
Introduction
This document was prepared to provide instructions for:
- preparing grease samples intended for production testing at the manufacturing plant stage;
- taking samples at the delivery site.
The methods and the ways of preparing samples differ depending on whether the sampling is performed on manufactured lots in a blending plant or on the delivery site.
ISO 3170 covers the manual sampling of liquid/semi-liquid hydrocarbons from a tank, a drum or a pipeline by manual means but does not include the sampling of greases.
ASTM D 4057[1] and DIN 51750-3[2] include specific procedures for sampling of greases. ASTM D 4057 includes specific provisions for sampling greases at the manufacturing stage.
WARNING The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel prior to the application of the standard, and to determine the applicability of any other restrictions for this purpose.
1 Scope
This document specifies methods for obtaining samples of lubricating grease from production lots or shipments and gives instructions for inspecting greases in sales packages.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 3170:2004, Petroleum liquids — Manual sampling
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| [1] | ASTM D 4057, Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| [2] | DIN 51750-3, Sampling of pasty and solid petroleum products |
| [3] | ISO 2137, Petroleum products and lubricants — Determination of cone penetration of lubricating greases and petrolatum |