※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO 加盟団体) の世界的な連合です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のために加盟機関に回覧されます。
国際規格 ISO 236/I は、ISO 勧告 R 236-1961 を 2 つの部分に分割した結果です。これは技術委員会 ISO/TC 29, 小型ツールによって起草され、 1975 年 11 月にメンバー団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | ハンガリー | ルーマニア |
| オーストリア | インド | 南アフリカ共和国 |
| ベルギー | イスラエル | スウェーデン |
| ブルガリア | イタリア | スイス |
| カナダ | 日本 | 七面鳥 |
| チェコスロバキア | 大韓民国 | イギリス |
| エジプト、アラブ共和国 | メキシコ | アメリカ合衆国 |
| フランス | オランダ | ソビエト連邦 |
| ドイツ | ポーランド |
この文書の不承認を表明した加盟団体はありませんでした。
この国際規格は、国際規格 ISO 236/II とともに、ISO 勧告 R 236-1961 を取り消して置き換えます。ISO 勧告 R 236-1961 は、その技術的改訂を構成します。
1 適用範囲と適用分野
この国際規格は、ハンドリーマの寸法を規定しています。
これには、それぞれ次の 3 つのテーブルが含まれます。
- 推奨される直径とそれに対応するミリメートル単位の寸法;
- 推奨される直径とそれに対応するインチ単位の寸法。
- 対応する寸法 (ミリメートルおよびインチ) は、直径のステップの関数として設定されます。
長さ、切断径、シャンク径の公差も指定されています。
3 参考文献
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO Member Bodies). The work of developing International Standards is carried out through ISO Technical Committees. Every Member Body interested in a subject for which a Technical Committee has been set up has the right to be represented on that Committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated to the Member Bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 236/I results from the subdivision into two parts of ISO Recommendation R 236-1961. It was drawn up by Technical Committee ISO/TC 29, Small tools, and was circulated to the Member Bodies in November 1975.
It has been approved by the Member Bodies of the following countries:
| Australia | Hungary | Romania |
| Austria | India | South Africa, Rep. of |
| Belgium | Israel | Sweden |
| Bulgaria | Italy | Switzerland |
| Canada | Japan | Turkey |
| Czechoslovakia | Korea, Rep. of | United Kingdom |
| Egypt, Arab Rep. of | Mexico | U.S.A. |
| France | Netherlands | U.S.S.R. |
| Germany | Poland |
No Member Body expressed disapproval of the document.
This International Standard, together with International Standard ISO 236/II, cancels and replaces ISO Recommendation R 236-1961, of which they constitute a technical revision.
1 SCOPE AND FIELD OF APPLICATION
This International Standard specifies the dimensions of hand reamers.
It includes three tables giving respectively:
- the recommended diameters and the corresponding dimensions in millimetres;
- the recommended diameters and the corresponding dimensions in inches;
- the corresponding dimensions, in millimetres and in inches, set out as functions of diameter steps.
Tolerances on lengths, cutting diameters and shank diameters are also specified.
3 REFERENCES
- ISO 236/II, Long fluted machine reamers, Morse taper shanks.
- ISO 237, Diameters of shanks and sizes of driving squares for rotating tools with parallel shanks.
- ISO 521, Machine chucking reamers with parallel shanks or Morse taper shanks.