※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語と表現の意味に関する説明、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、次の URL を参照してください: www.iso .org/iso/foreword.html .
ISO 23748 は、ACE/12/1 によって EN 3748:2001 として作成され、技術委員会 ISO/TC 20, 航空機および宇宙車両、小委員会 SC 10, 航空宇宙流体システムおよびコンポーネントによって (以下に規定されている以外の変更なしで) 採用されました。
以下は、この規格で行われた修正です。
- 表内の ISO 3601-1 サイズ コードへの参照。
- 表 13 の値を 90.27 から 91.27 に修正。
- タイトルと範囲に「静的アプリケーション」を追加。
- 「欧州規格による」が範囲から削除されました。
- ヨーロッパ規格への言及は削除されました。
1 スコープ
この国際規格は、静的シール用途で航空宇宙用の O リングに使用する溝の寸法を指定しています。
- ラジアル シーリング: ロッドまたはボアに取り付けられた O リング。
- 軸シール: 内部または外部圧力源。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
このドキュメントには規範的な参照はありません。
参考文献
| [1] | ISO 286‑2, 幾何学的製品仕様 (GPS) — 直線サイズの公差に関する ISO コード システム — 2: 穴とシャフトの標準公差クラスと限界偏差の表 |
| [2] | ISO 3601-1, 流体動力システム — O リング — 1: 内径、断面、公差および指定コード |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
ISO 23748 was prepared by ACE/12/1 as EN 3748:2001 and was adopted (without modification other than those stipulated below) by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 10, Aerospace fluid systems and components.
The following are the modifications made in this International Standard:
- reference to ISO 3601-1 size codes in tables;
- correction in Table 13 of value 90,27 to 91,27;
- addition of “static applications” in the title and scope;
- “according to European Standards” was removed in the scope;
- any reference to European Standards were removed.
1 Scope
This International Standard specifies the dimensions of grooves for use with O-rings for aerospace in static sealing applications:
- radial sealing: rod or bore mounted O-rings;
- axial sealing: internal or external pressure source.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
There are no normative references in this document.
Bibliography
| [1] | ISO 286‑2, Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| [2] | ISO 3601‑1, Fluid power systems — O-rings — 1: Inside diameters, cross-sections, tolerances and designation codes |