※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 2400 は、ISO と CEN 間の技術協力に関する協定 (ウィーン協定) に従って、欧州標準化委員会 (CEN) 技術委員会 CEN/TC 138, 非破壊検査、技術委員会 ISO/TC 135, 非破壊検査、小委員会 SC 3, 超音波検査と協力して作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 2400:1972) を廃止し、置き換えるものです。
初版からの変更点には次の追加が含まれます。
- ブロックの製造に関する新しい条項。
- 音速に関する新しい条項。
- ブロックのマーキングと認証に関する新しい条項。
- ブロック番号の変更の可能性に関する新しい条項。 1;
- 既存のブロックの使用に関する新しい条項。
- 速度の決定に関する規範的な付属書。
1 スコープ
この国際規格は、手動試験で使用される超音波試験装置を校正するための鋼製ブロックの寸法、材質、製造に関する要件を指定します。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 5577, 非破壊検査 — 超音波検査 — 用語
- EN 1330-4, 非破壊検査 — 用語 — Part 4: 超音波検査で使用される用語
- EN 10025-2, 構造用鋼の熱間圧延製品 — Part 2: 非合金構造用鋼の技術納品条件
3 用語と定義
この文書の目的のために、ISO 5577 および EN 1330-4 で与えられる用語と定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 2400 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 138, Non-destructive testing, in collaboration with Technical Committee ISO/TC 135, Non-destructive testing, Subcommittee SC 3, Ultrasonic testing, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 2400:1972), which has been technically revised.
Changes from the first edition include the addition of:
- a new clause on manufacture of the block;
- a new clause on sound velocities;
- a new clause on marking and certification of the blocks;
- a new clause on possible modifications to block No. 1;
- a new clause on the use of existing blocks;
- a normative annex on the determination of velocities.
1 Scope
This International Standard specifies requirements for the dimensions, material and manufacture of a steel block for calibrating ultrasonic test equipment used in manual testing.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 5577, Non-destructive testing — Ultrasonic inspection — Vocabulary
- EN 1330-4, Non-destructive testing — Terminology — Part 4: Terms used in ultrasonic testing
- EN 10025-2, Hot rolled products of structural steels — Part 2: Technical delivery conditions for non-alloy structural steels
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5577 and EN 1330-4 apply.