※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
適合性評価に関連する ISO 固有の用語や表現の意味の説明、および貿易の技術的障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照してください。 序文 - 補足情報
この文書を担当する委員会は、ISO/TC 41, プーリーおよびベルト (Veebelts を含む) 、サブ委員会 SC 1, 摩擦です。
1 スコープ
この国際規格は、農業機械で使用される V ドライブ ベルトの寸法の詳細を規定します。これは、そのようなドライブの設計における実践 (発行時点) を反映し、産業機械で使用される同様のベルトの国際規格への実践可能なリンクをここで, 提供することを目的としています。
注この国際規格の寸法はすべてミリメートル (mm) 単位です。
2 規範的参照
以下の文書は、全部または一部がこの文書で規範的に参照されており、その適用には不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 1081, ベルトドライブ — V ベルトおよび V リブドベルト、および対応する溝付きプーリー — 語彙
- ISO 4183, ベルトドライブ — 従来型および細幅 V ベルト — 溝付きプーリー (データム幅に基づくシステム)
- ISO 5290, ベルトドライブ — 細い V ベルトを結合するための溝付きプーリー — 溝セクション 9N/J, 15N/J および 25N/J (有効システム)
- ISO 5291, ベルトドライブ — 結合された古典的な V ベルト用の溝付きプーリー — 溝セクション AJ, BJ, CJ および DJ (効果的なシステム)
- ISO 9982, ベルトドライブ — 産業用途向けプーリーおよび V リブドベルト — PH, PJ, PK, PL, および PM プロファイル: 寸法
3 用語と定義
この文書の目的には、ISO 1081 で与えられる用語と定義が適用されます。
参考文献
| 1 | ISO 5289, 農業機械 — エンドレス六角形ベルトと対応するプーリーの溝部分 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 41, Pulleys and belts (including veebelts), Subcommittee SC 1, Friction.
1 Scope
This International Standard provides dimensional details of the V-drive belts used on agricultural machinery. It is intended to reflect practice (at the time of publication) in the design of such drives and to provide ここで, practicable, links to International Standards for similar belts used on industrial machinery.
NOTE All dimensions in this International Standard are in millimetres (mm).
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1081, Belt drives — V-belts and V-ribbed belts, and corresponding grooved pulleys — Vocabulary
- ISO 4183, Belt drives — Classical and narrow V-belts — Grooved pulleys (system based on datum width)
- ISO 5290, Belt drives — Grooved pulleys for joined narrow V-belts — Groove sections 9N/J, 15N/J and 25N/J (effective system)
- ISO 5291, Belt drives — Grooved pulleys for joined classical V-belts — Groove sections AJ, BJ, CJ and DJ (effective system)
- ISO 9982, Belt drives — Pulleys and V-ribbed belts for industrial applications — PH, PJ, PK, PL and PM profiles: Dimensions
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 1081 apply.
Bibliography
| 1 | ISO 5289, Agricultural machinery — Endless hexagonal belts and groove sections of corresponding pulleys |