この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照してください: 序文 — 補足情報 .
この文書を担当する委員会は、ISO/TC 113, Hydrometry 、Subcommittee SC 5, Instruments, Equipment and Data Management です。
この ISO 24155 の初版は、ISO/TS 24155:2007 を取り消して置き換えます。
序章
ハイドロメトリック データ伝送システムは、水資源の日常管理、および洪水、干ばつ、および水質と公衆衛生に影響を与える状況の警告と予測のためのデータを提供します。このシステムは、リモートのテレメトリ ステーションで測定されたデータを受信センターに送信して、さらに処理します。
この国際規格は、水圧データ伝送システムに必要な仕様を定義し、標準化しています。これは、水深データ伝送システムを構成する機器やユニットの仕様を記述するものではありませんが、水深データ伝送システムが提供すべき機能的性能を記述しています。
1 スコープ
この国際規格は、水圧データ伝送システム (HDTS) の設計と運用において考慮すべき技術要件と、これらのシステムに必要な機能を規定しています。 HDTS の範囲は、付録 A に示されています。
2 参考文献
以下の文書の全体または一部は、この文書で規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 772, Hydrometry - 語彙と記号
- ISO 80000-1, 数量および単位 — Part 1: 一般
- ISO/IEC 2382, 情報技術 - 語彙
3 用語と定義
このドキュメントの目的のために、ISO 772 および ISO/IEC 2382 で指定されている用語と定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT), see the following URL: Foreword — Supplementary information .
The committee responsible for this document is ISO/TC 113, Hydrometry, Subcommittee SC 5, Instruments, equipment and data management.
This first edition of ISO 24155 cancels and replaces ISO/TS 24155:2007.
Introduction
Hydrometric data transmission systems provide data for the day-to-day management of water resources and for warning and forecasting of floods, droughts and conditions affecting water quality and public health. The systems transmit data measured at remote telemetry stations to a receiving centre for further processing.
This International Standard defines and standardizes the required specifications of hydrometric data transmission systems. It does not describe the specifications of the equipment and units constituting hydrometric data transmission systems, but does describe the functional performance that the hydrometric data transmission systems should provide.
1 Scope
This International Standard specifies the technical requirements that should be considered in designing and operating hydrometric data transmission systems (HDTS) and also the necessary functions of those systems. The scope of HDTS is shown in Annex A.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 772, Hydrometry — Vocabulary and symbols
- ISO 80000-1, Quantities and units — Part 1: General
- ISO/IEC 2382, Information technology — Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 772 and ISO/IEC 2382 apply.