この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 8, 船舶および海洋技術、小委員会 SC 3, 配管および機械によって作成されました。
1 スコープ
この文書は、石油およびケミカルタンカー用のマニホールドのタイプ、構造、寸法、および技術的要件を規定しています。
これは、石油またはケミカル タンカーの貨物を移送するための貨物および蒸気配管システムに適用されます。
注記この文書は、ターミナルでの石油またはケミカル タンカーのバンカー (船舶燃料) 移送システム マニホールドの設計にも適用できます。 ISO 23212 は、一般に、供給船または陸上施設から船舶へのバンカー燃料および潤滑油移送用のフランジ接続に適用されます。
2 規範的な参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 898-1, 炭素鋼および合金鋼製ファスナーの機械的特性 — 1: 特定の特性クラスを持つボルト、ねじ、およびスタッド — 並目ねじおよび細目ねじ
- ISO 3506-1, ファスナー — 耐腐食性ステンレス鋼ファスナーの機械的特性 — 1: 指定された等級と特性クラスのボルト、ねじ、スタッド
- ASME B16.5, パイプ フランジおよびフランジ付き継手
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
ISO および IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
3.1
マニホールド
船上に取り付けられたフランジ付きパイプアセンブリで、ローディングアーム、ホース、またはスプールピースのプレゼンテーションフランジが接続されています
図 1 —貨物マニホールドの典型的な配置
Key
| 1 | 船内配管 |
| 2 | マニホールド |
| 3 | ローディングアームまたはホースまたはスプールピース |
参考文献
| [1] | ISO 4200, プレーン エンド スチール チューブ、溶接およびシームレス — 単位長さあたりの寸法と質量の一般的な表 |
| [2] | ISO 23212,船舶および海洋技術 — 燃料および潤滑油補給のためのフランジ接続 — 基本寸法および技術要件 |
| [3] | ASTM A106, 高温用シームレス炭素鋼管の標準仕様 |
| [4] | ASTM A234, 中温および高温サービス用の鍛造炭素鋼および合金鋼の配管継手の標準仕様 |
| [5] | ASTM A105, 配管用途の炭素鋼鍛造品の標準仕様 |
| [6] | ASTM A350, 炭素および低合金鋼鍛造品の標準仕様、配管部品のノッチ靭性試験が必要 |
| [7] | ASTM A193, 高温または高圧サービスおよびその他の特殊用途向けの合金鋼およびステンレス鋼ボルト締めの標準仕様 |
| [8] | ASTM A194, 高圧または高温サービス、またはその両方のボルト用炭素鋼、合金鋼、およびステンレス鋼ナットの標準仕様(ASTM インターナショナル) |
| [9] | ASTM A312, シームレス、溶接、および重度の冷間加工されたオーステナイト系ステンレス鋼パイプの標準仕様 |
| [10] | ASTM A358, 高温サービスおよび一般用途向けの電気融着オーステナイト系クロムニッケルステンレス鋼管の標準仕様 |
| [11] | ASTM A403, 鍛造オーステナイト系ステンレス鋼配管継手の標準仕様 |
| [12] | ASTM A320, 低温サービス用の合金鋼およびステンレス鋼ボルト締めの標準仕様 |
| [13] | ASME B31.3, プロセス配管 |
| [14] | OCIMF, 石油およびケミカル タンカー マニホールドおよび関連機器に関する勧告 - 初版2017 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 8, Ships and marine technology, Subcommittee SC 3, Piping and machinery.
1 Scope
This document specifies the types, structure, dimensions and technical requirements of manifolds for oil and chemical tankers.
It applies to the cargo and vapour piping systems for the transfer of cargoes of oil or chemical tankers.
NOTE This document can be also be applied to the design of bunker (ship fuel) transfer system manifolds for oil or chemical tankers at terminals. ISO 23212 is generally applicable to flanged connections for bunker fuel and lubricating oil transfer to ships from supply vessels or onshore facilities.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel — 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
- ISO 3506-1, Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — 1: Bolts, screws and studs with specified grades and property classes
- ASME B16.5, Pipe Flanges and Flanged Fittings
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
3.1
manifold
flanged pipe assembly, mounted onboard ship to which the presentation flange of the loading arm, hose or spool piece is connected
Figure 1—Typical arrangement of cargo manifold
Key
| 1 | onboard piping |
| 2 | manifold |
| 3 | loading arm or hose or spool piece |
Bibliography
| [1] | ISO 4200, Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| [2] | ISO 23212 Ships and marine technology — Flange connection for fuel and lubrication oil bunkering — Basic dimensions and technical requirements |
| [3] | ASTM A106, Standard specification for Seamless Carbon Steel Pipe for High-Temperature Service |
| [4] | ASTM A234, Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
| [5] | ASTM A105, Standard Specification for Carbon Steel Forgings for Piping Applications |
| [6] | ASTM A350, Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components |
| [7] | ASTM A193, Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications |
| [8] | ASTM A194, Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both (ASTM International) |
| [9] | ASTM A312, Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| [10] | ASTM A358, Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
| [11] | ASTM A403, Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
| [12] | ASTM A320, Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service |
| [13] | ASME B31.3, Process piping |
| [14] | OCIMF, Recommendations for Oil and Chemical Tanker Manifolds and Associated Equipment-First Edition 2017 |