※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 156, 金属および合金の腐食、小委員会 SC 1, 腐食制御工学のライフ サイクルによって作成されました。
1 スコープ
この文書は、化石燃料発電所における腐食制御工学のライフサイクルにおける各要素の一般的な要件を指定しています。
この文書は、あらゆるタイプの化石燃料発電所の防食工学に適用されます。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
このドキュメントの目的のために、ISO 8044, ISO 23123, ISO 23222 および以下に記載されている用語と定義が適用されます。
ISO および IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
3.1
化石燃料発電所の防食工学
化石燃料発電プラントの設備・設備・システムの金属腐食速度を、各種腐食制御技術を適用して要求範囲内に制御するプロセス
3.2
水と蒸気の品質の調整と制御
水と蒸気の品質を調整するために水と蒸気のシステムに化学薬品を追加することにより、金属の腐食を制御するプロセス
3.3
燃焼調整
熱交換管の腐食を避けるためにボイラーの燃焼条件を調整するプロセス
3.4
流動加速腐食
特定の運転条件下で、媒体の流れによって加速された管内壁の酸化皮膜の溶解により、金属管の肉厚が減少する腐食。
3.5
高温蒸気腐食
高温蒸気条件下での金属部品表面の腐食
3.6
火災側の高温腐食
ボイラー加熱面の火側の水冷壁、過熱器および再熱器の金属管の外壁の高温での腐食
3.7
低温腐食
硫酸露点以下の温度で金属表面に煙道ガス中の硫酸ガスが凝縮することによる腐食
3.8
レイアップ腐食
化石燃料発電設備のレイアップ中の腐食
参考文献
| [1] | ISO 2063-1, 溶射 — 亜鉛、アルミニウムおよびそれらの合金 — 1: 防食システムの設計上の考慮事項と品質要件 |
| [2] | ISO 9001, 品質管理システム — 要件 |
| [3] | ISO 12473, 海水における陰極防食の一般原則 |
| [4] | ISO 12696, コンクリート中の鋼の陰極防食 |
| [5] | ISO 13174, 港湾設備の陰極防食 |
| [6] | ASTM A335, 高温サービス用シームレス フェライト合金鋼管の標準仕様 |
| [7] | ASTM A470, タービンローターおよびシャフト用の真空処理された炭素および合金鋼鍛造品の標準仕様 |
| [8] | ASTM A564, 熱間圧延および冷間仕上げの時効硬化ステンレス鋼バーおよび形状の標準仕様 |
| [9] | ASTM A473, ステンレス鋼鍛造品の標準仕様 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 156, Corrosion of metals and alloys, Subcommittee SC 1, Corrosion control engineering life cycle.
1 Scope
This document specifies general requirements for each element in the life cycle of corrosion control engineering in fossil fuel power plants.
This document is applicable to corrosion control engineering of all types of fossil fuel power plants.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 8044, Corrosion of metals and alloys — Vocabulary
- ISO 23123, Corrosion control engineering life cycle — General requirements
- ISO 23222, Corrosion control engineering life cycle — Risk assessment
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 8044, ISO 23123, ISO 23222 and the following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
3.1
corrosion control engineering in fossil fuel power plants
process of controlling the metal corrosion rate of fossil fuel power plant equipment, facilities and systems within the required range by applying various corrosion control technologies
3.2
water and steam quality regulation and control
process of controlling metal corrosion by adding chemical agents into the water and steam system to regulate the water and steam quality
3.3
combustion adjustment
process of adjusting the combustion conditions of a boiler to avoid corrosion of heat exchange tubes
3.4
flow accelerated corrosion
corrosion in which the wall thickness of metal pipe is reduced due to dissolution of oxidation film on the inner wall of the pipe accelerated by medium flow under a particular operating condition
3.5
high-temperature steam corrosion
corrosion on the metal component surface under high-temperature steam conditions
3.6
high temperature corrosion on the fire side
corrosion at high temperature on the external wall of metal tubes for the water-cooled wall, superheater and reheater on the fire side of the boiler heating surface
3.7
low temperature corrosion
corrosion due to condensation of sulfuric acid gas in the flue gas on a metal surface at a temperature below the sulfuric acid dew point
3.8
lay-up corrosion
corrosion during lay-up of fossil fuel power plant equipment
Bibliography
| [1] | ISO 2063-1, Thermal spraying — Zinc, aluminium and their alloys — 1: Design considerations and quality requirements for corrosion protection systems |
| [2] | ISO 9001, Quality management systems — Requirements |
| [3] | ISO 12473, General principles of cathodic protection in seawater |
| [4] | ISO 12696, Cathodic protection of steel in concrete |
| [5] | ISO 13174, Cathodic protection of harbour installations |
| [6] | ASTM A335, Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
| [7] | ASTM A470, Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts |
| [8] | ASTM A564, Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| [9] | ASTM A473, Standard Specification for Stainless Steel Forgings |