※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 24346 は、技術委員会 ISO/TC 219, 床材によって作成されました。
1 スコープ
この国際規格は、弾力性のある床材の全体の厚さを決定する方法を指定しています。
2 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
2.1
全体の厚さ
指定された荷重下で弾力性のある床材が挿入された 2 つの平行プレート間の垂直距離
参考文献
| [1] | EN 428, 弾力性のある床材 — 全体の厚さの測定 |
| [2] | ASTM F 386, 平らな表面を持つ弾力性のある床材の厚さの標準試験方法 |
| [3] | ASTM F 387, 発泡層を備えた弾性床材の厚さを測定するための標準試験方法 |
| [4] | JIS A 1454, 試験方法 - 弾性床材、セクション 6.3 - 床タイルの寸法および直角度、およびセクション 6.4 - 床シートの寸法 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 24346 was prepared by Technical Committee ISO/TC 219, Floor coverings.
1 Scope
This International Standard specifies a method for determining the overall thickness of resilient floor coverings.
2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
2.1
overall thickness
vertical distance between two parallel plates where a resilient floor covering is inserted under a specified load
Bibliography
| [1] | EN 428, Resilient floor covering — Determination of overall thickness |
| [2] | ASTM F 386, Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces |
| [3] | ASTM F 387, Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer |
| [4] | JIS A 1454, Test Methods — Resilient Floor Coverings, Section 6.3 — Dimension and squareness of Floor Tile and Section 6.4 — Dimension of Floor Sheet |