※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 24393 は、技術委員会 ISO/TC 4 「転がり軸受」によって作成されました。
導入
ISO 5593 [1] リニアモーション転がり軸受の分野における 3 つの用語のみの出典です。しかし、近年では多くのメーカーから様々なタイプの直動転がり軸受や直動案内システムが開発・生産されています。
したがって、この国際規格は、リニアガイドシステム、リニアモーション転がり軸受、サブアセンブリ、部品、アクセサリ、および技術の名称を統一し、明確にするための初期段階として開発されました。
範囲
この国際規格は、リニアガイドシステム、リニアモーション転がり軸受、およびそれらに関連するサブアセンブリ、部品、付属品、および技術の分野で適用される用語を定義します。
参考文献
| 1 | ISO 5593:1997, 転がり軸受 ― 用語 |
| 2 | ISO 10241, 国際用語規格 ― 準備とレイアウト |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 24393 was prepared by Technical Committee ISO/TC 4, Rolling bearings.
Introduction
ISO 5593 [1] is the source of only three terms in the field of linear motion rolling bearings. However, various types of linear motion rolling bearings and linear guidance systems have been developed and produced by many manufacturers in recent years.
Therefore this International Standard has been developed as the initial stage to unify and clarify the names for linear guidance systems, linear motion rolling bearings, subassemblies, parts, accessories, and technologies.
Scope
This International Standard defines terms applied in the field of linear guidance systems, linear motion rolling bearings and their related subassemblies, parts, accessories, and technologies.
Bibliography
| 1 | ISO 5593:1997, Rolling bearings ― Vocabulary |
| 2 | ISO 10241, International terminology standards ― Preparation and layout |