※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www を 参照してください。 .iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 45, ゴムおよびゴム製品、小委員会 SC 3, ゴム産業で使用される原材料 (ラテックスを含む)によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 248-2:2012) を取り消し、置き換えます。
前版との主な変更点は、2017 年に日本が実施した追加 ITP を受けて、表 B.2 にイソプレンゴムの精度データが追加されたことです。
ISO 248 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
警告この文書を使用する人は、通常の実験室での実践に精通している必要があります。この文書は、その使用に関連する安全上の問題がある場合、そのすべてに対処することを目的とするものではありません。適切な安全と健康慣行を確立するのはユーザーの責任です。
注意この文書で指定されている一部の手順には、局所的な環境危険を引き起こす可能性のある物質の使用または生成、または廃棄物の生成が含まれる可能性があります。使用後の安全な取り扱いと廃棄については、適切な文書を参照する必要があります。
1 スコープ
1.1この文書は、赤外線乾燥ユニットを備えた自動分析装置を使用して、生ゴム中の水分およびその他の揮発性物質の含有量を測定するための 2 つの熱重量分析方法を規定しています。
1.2これらの方法は、ISO 1629 にリストされている合成ゴム (SBR, NBR, BR, IR, CR, IIR, ハロゲン化 IIR, EPDM) およびベール、ゴムなどのさまざまな形態の生ゴムの揮発性物質含有量の測定に適用できます。ブロック、チップ、ペレット、クラム、パウダー、シート。これらの方法は、質量の変化が元の揮発性物質の損失のみによるものであり、ゴムの劣化によるものではないことが証明されている場合に限り、他の生ゴムにも適用できる可能性があります。
1.3この方法は、ISO 1795 で指定されている均質化が必要な生ゴムには適用できません。
1.4 ISO 248-1 で指定されているホットミル法およびオーブン法と、この文書で指定されている方法では、同じ結果が得られない可能性があります。したがって、紛争の場合には、ISO 248-1:2011 に規定されているオーブン法、手順 A が審判法となります。
注これらの方法は、自動分析装置の測定条件が特定の生ゴムまたは生ゴムのグレードに対して固定されている場合、品質管理などの日常的な測定に役立ちます。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
この文書には用語や定義は記載されていません。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
参考文献
| 1 | ISO 1629, ゴムおよびラテックス - 命名法 |
| 2 | ISO/TR 9272, ゴムおよびゴム製品 — 試験方法規格の精度の決定 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 3, Raw materials (including latex) for use in the rubber industry.
This second edition cancels and replaces the first edition (ISO 248-2:2012), which has been technically revised.
The main change compared to the previous edition is the addition of precision data for isoprene rubber in Table B.2, following an additional ITP conducted by Japan in 2017.
A list of all parts in the ISO 248 series can be found on the ISO website.
WARNING Persons using this document should be familiar with normal laboratory practice. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices.
CAUTION Some procedures specified in this document could involve the use or generation of substances, or the generation of waste, that could constitute a local environmental hazard. Reference should be made to appropriate documentation on safe handling and disposal after use.
1 Scope
1.1 This document specifies two thermogravimetric methods for the determination of moisture and other volatile-matter content in raw rubbers by using an automatic analyser with an infrared drying unit.
1.2 These methods are applicable to the determination of volatile-matter content in synthetic rubbers (SBR, NBR, BR, IR, CR, IIR, halogenated IIR and EPDM) listed in ISO 1629 and to various forms of raw rubber, such as bale, block, chip, pellet, crumb, powder and sheet. These methods might also be applicable to other raw rubbers only when the change in mass is proven to be due solely to loss of original volatile matter and not to rubber degradation.
1.3 The methods are not applicable to raw rubbers which need homogenizing as specified in ISO 1795.
1.4 The hot-mill method and the oven method specified in ISO 248-1 and the methods specified in this document might not give identical results. In cases of dispute, therefore, the oven method, procedure A, specified in ISO 248-1:2011, is the referee method.
NOTE These methods can be useful for routine determinations, e.g. quality control, when the measurement conditions for the automatic analyser are fixed for a particular raw rubber or grade of raw rubber.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 248-1, Rubber, raw — Determination of volatile-matter content — Part 1: Hot-mill method and oven method
- ISO 1795, Rubber, raw natural and raw synthetic — Sampling and further preparative procedures
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| 1 | ISO 1629, Rubber and latices — Nomenclature |
| 2 | ISO/TR 9272, Rubber and rubber products — Determination of precision for test method standards |