※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 2495 は、技術委員会 ISO/TC 35, 塗料およびワニス、小委員会 SC 2, 顔料および増量剤によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 2495:1972) を廃止し、置き換えます。
この国際規格の附属書 A は情報提供のみを目的としています。
1 スコープ
この国際規格は、鉄青顔料の要件と対応する試験方法を指定しています。
2 規範的参照
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 385-1:1984, 実験用ガラス器具 — ビュレット — Part 1: 一般要件。
- ISO 648:1977, 実験用ガラス器具 — ワンマークピペット。
- ISO 787-1:1982, 顔料および増量剤の一般的な試験方法 - Part 1: 顔料の色の比較。
- ISO 787-2:1981, 顔料および増量剤の一般試験方法 - Part 2: 105 °C での物質の揮発性の測定。
- ISO 787-3:1979, 顔料および増量剤の一般試験方法 - Part 3: 水溶性物質の測定 - 熱抽出法。
- ISO 787-4:1981, 顔料および増量剤の一般試験方法 - Part 4: 水抽出物の酸性またはアルカリ性の測定。
- ISO 787-5:1980, 顔料および増量剤の一般試験方法 - Part 5: 吸油量の測定。
- ISO 787-16:1986, 顔料および増量剤の一般的な試験方法 - Part 16: 相対着色強度 (または同等の着色値) および有色顔料の還元時の色の決定 - 視覚的比較方法。
- ISO 842:— 1) 、塗料およびワニスの原料 — サンプリング。
- ISO 1042:1983, 実験用ガラス器具 — ワンマークメスフラスコ。
- ISO 3696:1987, 分析実験室で使用する水 - 仕様と試験方法。
- ISO 8780-2:1990, 顔料および増量剤 — 分散特性評価のための分散方法 — Part 2: 振動振盪機を使用した分散。
3 定義
この国際規格の目的のために、次の定義が適用されます。
3.1
鉄青顔料
鉄塩とシアノ鉄酸(II)イオンまたはシアノ鉄酸(III)イオンとの反応と、必要に応じて酸化剤による処理によって形成される顔料。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 2495 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 2, Pigments and extenders.
This second edition cancels and replaces the first edition (ISO 2495:1972), which has been technically revised.
Annex A of this International Standard is for information only.
1 Scope
This International Standard specifies the requirements and the corresponding methods of test for iron blue pigments.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 385-1:1984, Laboratory glassware — Burettes — Part 1: General requirements.
- ISO 648:1977, Laboratory glassware — One-mark pipettes.
- ISO 787-1:1982, General methods of test for pigments and extenders — Part 1: Comparison of colour of pigments.
- ISO 787-2:1981, General methods of test for pigments and extenders — Part 2: Determination of matter volatile at 105 °C.
- ISO 787-3:1979, General methods of test for pigments and extenders — Part 3: Determination of matter soluble in water — Hot extraction method.
- ISO 787-4:1981, General methods of test for pigments and extenders — Part 4: Determination of acidity or alkalinity of the aqueous extract.
- ISO 787-5:1980, General methods of test for pigments and extenders — Part 5: Determination of oil absorption value.
- ISO 787-16:1986, General methods of test for pigments and extenders — Part 16: Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments — Visual comparison method.
- ISO 842:— 1) , Raw materials for paints and varnishes — Sampling.
- ISO 1042:1983, Laboratory glassware — One-mark volumetric flasks.
- ISO 3696:1987, Water for analytical laboratory use — Specification and test methods.
- ISO 8780-2:1990, Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 2: Dispersion using an oscillatory shaking machine.
3 Definition
For the purposes of this International Standard, the following definition applies.
3.1
iron blue pigment
A pigment formed by the reaction of iron salts with cyanoferrate(II) or cyanoferrate(III) ions and followed, if necessary, by treatment with oxidizing agents.